{"product_id":"walter-titex-5059480-3-8-in-jobber-drill-bit-hss-oxide","title":"Walter-titex 5059480 3\/8 in Jobber Drill Bit Hss Oxide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WALTER-TITEX 5059480 is a jobber length drill bit designed for high-performance drilling in cast iron, non-ferrous metals, and steel. Built from high speed steel with an oxide coating, it runs a 130-degree drill point angle and a parabolic flute geometry that improves chip evacuation in deeper cuts. The straight-cylindrical shank measures 3\/8 inches in diameter and fits standard drill chucks without adapters. With an overall length of 5.25 inches and a flute-to-diameter ratio of 8xD, this bit handles both blind hole and stack drilling applications where consistent performance and flute clearance are critical. Licensed trades and industrial machinists reach for this series when chip control and feed rate stability matter.\u003c\/p\u003e\n\u003cp\u003eThe 5059480 fits production and maintenance drilling operations in residential and commercial mechanical, fabrication, and industrial settings. It is built to ANSI and ISO standards and carries a BS and DIN specification designation, making it a compatible choice for shops running to international tolerances. The parabolic flute design handles interrupted cuts and stack drilling without the chip packing that straight-flute bits can experience. Primary workpiece materials include cast iron, non-ferrous metal, and steel, covering a wide range of trade and light manufacturing jobs. Coolant-through capability is not available on this bit, so flood or mist coolant applied externally is the standard approach for high-cycle use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e130-degree drill point angle with standard point type and web-thinned, tapered web for reduced thrust force\u003c\/li\u003e\n  \u003cli\u003eParabolic flute geometry promotes efficient chip evacuation in blind hole and stack drilling\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with oxide coating for surface hardness and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical 3\/8-inch shank fits standard three-jaw and keyless drill chucks\u003c\/li\u003e\n  \u003cli\u003eRated for cast iron, non-ferrous metal, and steel workpieces\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI, ISO, BS, and DIN standards for dimensional accuracy and tolerance class h8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and standard-production drill bit for use in any drilling application requiring a 3\/8-inch straight-shank jobber length bit rated for cast iron, non-ferrous metal, and steel.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists, maintenance technicians, and trade professionals using standard drill presses, CNC machining centers, or handheld power drills with 3\/8-inch or larger chucks. Secure the shank fully in the chuck before operation and confirm chuck key or collar is tightened. This bit does not support internal coolant delivery, so apply external coolant or cutting fluid when drilling steel or cast iron at sustained feed rates to manage heat buildup. Inspect the cutting edges for wear before each use and replace when point geometry is degraded to avoid oversize holes or workpiece damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3.4375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.811 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Length\u003c\/strong\u003e: 0.0874 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 2.795 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Parabolic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute By Diameter Ratio\u003c\/strong\u003e: 8xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: h8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Blind Hole, Stack Drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: A1222\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO, BS, DIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WALTER-TITEX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5059480\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WALTER-TITEX","offers":[{"title":"Default Title","offer_id":51734672474418,"sku":"5059480","price":46.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4ad60b9b939f99ede8efd0c9833f48af_0e07f47e-ec76-404b-8567-d1d3cbd1aab5.jpg?v=1788764665","url":"https:\/\/voomisupply.com\/products\/walter-titex-5059480-3-8-in-jobber-drill-bit-hss-oxide","provider":"Voomi Supply","version":"1.0","type":"link"}