{"product_id":"walter-titex-5057055-screw-machine-drill-bit-0-182in","title":"Walter-titex 5057055 Screw Machine Drill Bit 0.182in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WALTER-TITEX 5057055 is a screw machine length drill bit designed for high-performance drilling in demanding materials. Built from cobalt vanadium high speed steel with a bright uncoated finish, it delivers hardness and heat resistance suited for production and job-site use. The 130-degree split point initiates cuts without walking, reducing the need for a center punch. A parabolic flute geometry improves chip evacuation and allows deeper cuts relative to bit diameter. At 0.182 inches (wire gauge #14) in diameter with an overall length of 2-9\/32 inches, this bit fits standard drill chucks and is sized for close-tolerance work in metalworking and fabrication environments.\u003c\/p\u003e\n\u003cp\u003eThis bit is intended for right-hand cutting in ferrous and non-ferrous metals, including cast iron, stainless steel, hardened materials, and general steel stock. The screw machine length format  -  shorter than jobber length  -  provides added rigidity in turret lathes, CNC drill presses, and screw machine setups where stub rigidity matters. It is equally at home in manual drill presses and hand-held power drills used by machinists, millwrights, and maintenance technicians. The 3xD flute-to-diameter ratio supports a maximum drilling depth of 0.600 inches per pass.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt vanadium high speed steel construction for elevated heat resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e130-degree split point with web thinning reduces thrust and eliminates walking on entry\u003c\/li\u003e\n  \u003cli\u003eParabolic flute geometry promotes fast, clean chip ejection for uninterrupted drilling\u003c\/li\u003e\n  \u003cli\u003eScrew machine (stub) length provides superior rigidity compared to jobber-length bits\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank fits standard 3-jaw chucks and collet-style tool holders\u003c\/li\u003e\n  \u003cli\u003eMeets DIN, ISO, and BS standards; Series A1148 designation for consistent spec compliance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in screw machines, CNC drill presses, turret lathes, and conventional drill presses requiring a stub-length, straight-shank bit in the 0.150 to 0.200 inch diameter range. Primary workpiece materials include cast iron, hard materials, non-ferrous metals, stainless steel, and general steel per Series A1148 application guidelines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or maintenance technicians familiar with drill press and machine tool operation. Ensure the spindle is fully stopped and the machine is locked out before changing bits. Secure the shank fully in the chuck or collet to the rated grip depth to prevent pullout under load. Do not exceed the recommended feed rate or drilling depth per pass for the workpiece material, as cobalt HSS bits can fracture under sudden lateral loads.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.182 inches (Wire Gauge #14)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-9\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 15\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 0.600 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Length\u003c\/strong\u003e: 0.0427 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Parabolic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt Vanadium High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter Tolerance\u003c\/strong\u003e: -0.00071 to 0.00000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Hard Material, Non-Ferrous Metal, Stainless Steel, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: A1148\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DIN, ISO, BS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: High Performance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WALTER-TITEX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5057055\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WALTER-TITEX","offers":[{"title":"Default Title","offer_id":51742733533490,"sku":"5057055","price":68.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d778e31de38b3101e5d48fe228b3dfd1_64f9f9cb-262d-4e91-96da-ea41ff27cd03.jpg?v=1788839157","url":"https:\/\/voomisupply.com\/products\/walter-titex-5057055-screw-machine-drill-bit-0-182in","provider":"Voomi Supply","version":"1.0","type":"link"}