{"product_id":"walter-surface-technologies-15q462-flap-disc-120-grit","title":"Walter Surface Technologies 15Q462 Flap Disc 120 Grit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe WALTER SURFACE TECHNOLOGIES 15Q462 is a Type 27 zirconia alumina flap disc engineered for surface grinding and finishing on an angle grinder. Rated at a maximum of 13,300 RPM, this disc measures 4.5 inches in diameter with a 7\/8 inch center arbor hole. The 120-grit, fine-grade abrasive surface is bonded to a plastic backing that supports consistent flap wear and cool cutting action. The trimmable design allows the operator to expose fresh abrasive as the disc wears, extending usable life. Metal fabricators, welders, and maintenance technicians reach for this disc when blending welds or finishing non-ferrous and ferrous surfaces.\u003c\/p\u003e\u003cp\u003eThis flap disc is suited for use on aluminum, non-ferrous metals, and stainless steel in both light industrial and fabrication shop environments. The Type 27 profile presents a flat grinding face, making it well suited for flat surface work and edge blending. It mounts via an arbor attachment on standard 4.5 inch angle grinders. The fine 120-grit rating positions it as a finishing step following coarser stock removal, producing a smooth surface ready for inspection, coating, or further polishing.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eZirconia alumina abrasive material delivers durable cutting performance on stainless steel and non-ferrous metals\u003c\/li\u003e\n\u003cli\u003eType 27 flat profile designed for flat surface grinding and weld blending\u003c\/li\u003e\n\u003cli\u003e120 fine grit for finishing passes after coarser stock removal\u003c\/li\u003e\n\u003cli\u003ePlastic backing with trimmable construction extends disc service life\u003c\/li\u003e\n\u003cli\u003eMaximum 13,300 RPM rating compatible with standard 4.5 inch angle grinders\u003c\/li\u003e\n\u003cli\u003eArbor attachment with 7\/8 inch center hole for secure mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with angle grinders accepting a 4.5 inch disc with a 7\/8 inch arbor hole. Rated for aluminum, non-ferrous metal, and stainless steel material applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis disc should be installed and replaced by a qualified operator familiar with angle grinder safety practices. Always power down and disconnect the grinder before mounting or removing a disc. Verify the tool RPM rating meets or falls below the 13,300 RPM maximum before use. Inspect the disc for damage before each use and never operate a cracked or delaminated flap disc.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Diameter\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Hole Size\u003c\/strong\u003e: 7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlap Disc Type\u003c\/strong\u003e: Type 27\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrit\u003c\/strong\u003e: 120\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: Fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Material\u003c\/strong\u003e: Zirconia Alumina\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Type\u003c\/strong\u003e: Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 13,300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Type\u003c\/strong\u003e: Arbor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Aluminum, Non-Ferrous Metal, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility\u003c\/strong\u003e: Angle Grinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrimmable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 15-Q\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.032 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WALTER SURFACE TECHNOLOGIES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 15Q462\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WALTER","offers":[{"title":"Default Title","offer_id":67911572980018,"sku":"15Q462","price":29.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e6d470fd2a8b9ea50f6206c9e91da00a.jpg?v=1791212514","url":"https:\/\/voomisupply.com\/products\/walter-surface-technologies-15q462-flap-disc-120-grit","provider":"Voomi Supply","version":"1.0","type":"link"}