{"product_id":"walter-surface-technologies-15f304-mounted-flap-wheel-40-grit","title":"Walter Surface Technologies 15F304 Mounted Flap Wheel 40 Grit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe WALTER SURFACE TECHNOLOGIES 15F304 is a mounted flap wheel designed for aggressive stock removal and surface blending on metal workpieces. Constructed with aluminum oxide abrasive on a cloth backing, it runs at up to 25,000 RPM on a 1\/4-inch shank. At 2 inches in diameter and 1 inch in face width, this coarse-grade, 40-grit wheel delivers fast cutting action suited to deburring, weld blending, and edge finishing on aluminum, stainless steel, and carbon steel. It is installed directly into a die grinder or straight-shaft tool, making it a practical choice for fabrication shops and field service work on metal components.\u003c\/p\u003e\u003cp\u003eThis mounted flap wheel is used in light fabrication, maintenance, and repair applications where controlled surface conditioning is required. Its cloth-backed aluminum oxide construction handles heat and flex better than rigid abrasive points, making it well suited for contoured surfaces and inside radii. Typical applications include weld seam blending, deburring machined parts, and surface prep before coating or inspection. It is compatible with bench grinders and straight-shaft tools accepting a 1\/4-inch shank.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAluminum oxide abrasive on cloth backing for durability and flexibility\u003c\/li\u003e\n\u003cli\u003e40 grit, coarse grade for aggressive material removal\u003c\/li\u003e\n\u003cli\u003e25,000 maximum RPM rating for use with high-speed die grinders\u003c\/li\u003e\n\u003cli\u003e1\/4-inch shank mount for compatibility with standard straight-shaft tools and bench grinders\u003c\/li\u003e\n\u003cli\u003e2-inch diameter and 1-inch face width suited to detail work and inside contours\u003c\/li\u003e\n\u003cli\u003eRated for use on aluminum, stainless steel, and carbon steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with bench grinders and straight-shaft tools equipped with a 1\/4-inch collet or chuck. Rated for material applications on aluminum, stainless steel, and steel.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by threading the 1\/4-inch shank into the collet of a die grinder or straight-shaft tool and tightening securely before operation. Always verify that the tool spindle speed does not exceed the 25,000 RPM maximum rating of the wheel. Disconnect power to the tool before mounting or removing the flap wheel. Wear appropriate eye protection and observe all applicable ANSI B11 and OSHA grinding safety requirements during use.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrit\u003c\/strong\u003e: 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: Coarse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Material\u003c\/strong\u003e: Aluminum Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Type\u003c\/strong\u003e: Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterleaf\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 25,000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Aluminum, Stainless Steel, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Use With\u003c\/strong\u003e: Bench Grinder, Straight Shaft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2 inches x 2 inches x 2.4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31191600\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WALTER SURFACE TECHNOLOGIES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 15F304\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WALTER","offers":[{"title":"Default Title","offer_id":67910586335538,"sku":"15F304","price":18.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7d49a052e42b3f0fe01685ddc11e4d10.jpg?v=1791198974","url":"https:\/\/voomisupply.com\/products\/walter-surface-technologies-15f304-mounted-flap-wheel-40-grit","provider":"Voomi Supply","version":"1.0","type":"link"}