{"product_id":"walter-surface-technologies-13j504-wheel-brush-5-in","title":"Walter Surface Technologies 13J504 Wheel Brush 5 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WALTER SURFACE TECHNOLOGIES 13J504 is a 5-inch crimped steel wire wheel brush designed for aggressive surface cleaning, deburring, and rust or scale removal on metal workpieces. It mounts via a 5\/8-11 threaded arbor hole and is rated to 10,000 RPM, making it compatible with standard angle grinders and bench grinders used in fabrication, welding prep, and maintenance work. The crimped wire fill provides a slightly flexible, less aggressive cut than knotted styles, reducing surface gouging while still delivering effective cleaning action. Wire filament diameter falls in the 0.0100 to 0.0199 inch range, balancing durability with surface finish quality.\u003c\/p\u003e\n\u003cp\u003eThis wheel brush is suited for use in metal fabrication shops, welding operations, industrial maintenance, and mechanical repair settings. It is most commonly installed on angle grinders or bench grinders by metalworkers, pipefitters, ironworkers, and maintenance technicians who need consistent, repeatable surface preparation before welding, coating, or inspection. The 5\/8-inch face width and 1-inch trim length are well matched to surface cleaning passes on flat stock, pipe, and structural members.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e5-inch outside diameter with a 5\/8-inch face width for broad surface contact\u003c\/li\u003e\n  \u003cli\u003eCrimped steel wire fill for controlled, flexible cleaning action with reduced surface gouging\u003c\/li\u003e\n  \u003cli\u003e5\/8-11 threaded arbor hole for direct mounting to standard grinder spindles without an adapter\u003c\/li\u003e\n  \u003cli\u003e10,000 RPM maximum speed rating suits most 4.5 to 5-inch angle grinders\u003c\/li\u003e\n  \u003cli\u003eFilament wire diameter range of 0.0100 to 0.0199 inches for balanced cutting and wire life\u003c\/li\u003e\n  \u003cli\u003e1-inch trim length supports consistent bristle contact and stable brush geometry over the service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with angle grinders and bench grinders accepting a 5\/8-11 threaded arbor spindle. Verify that the grinder's no-load RPM rating does not exceed the 10,000 RPM maximum marked on this brush before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified tradesperson familiar with abrasive wheel safety. Always disconnect power and confirm the grinder is fully de-energized before mounting or removing the brush. Thread the brush onto the 5\/8-11 spindle by hand until snug, then confirm the rated RPM of the grinder does not exceed 10,000 RPM before use. Wear appropriate PPE including a face shield, eye protection, and heavy gloves during operation, and inspect the brush for damaged or broken wires before each use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArbor Hole Thread Size\u003c\/strong\u003e: 5\/8-11\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArbor Hole Style\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Arbor Hole\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Crimped\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilament Wire Diameter Range\u003c\/strong\u003e: 0.0100 to 0.0199 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 10,000 RPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrim Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Included\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 5.2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 5.2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 1.3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.79 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31191521\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WALTER SURFACE TECHNOLOGIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 13J504\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WALTER","offers":[{"title":"Default Title","offer_id":67906138865970,"sku":"13J504","price":26.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2b89d4187f6624c9677e49abd8dbe50e.jpg?v=1791165208","url":"https:\/\/voomisupply.com\/products\/walter-surface-technologies-13j504-wheel-brush-5-in","provider":"Voomi Supply","version":"1.0","type":"link"}