{"product_id":"walter-surface-technologies-13c170-wheel-brush-2-in","title":"Walter Surface Technologies 13C170 Wheel Brush 2 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WALTER SURFACE TECHNOLOGIES 13C170 is a crimped stainless steel wheel brush designed for aggressive surface preparation and finishing work on steel. Rated to 25,000 RPM, it mounts to a die grinder via a 1\/4-inch shank and delivers consistent wire contact across a 2-inch outside diameter and 5\/8-inch face width. The crimped wire construction allows the filaments to flex and conform to irregular surfaces, making this brush well suited for deburring, cleaning weld seams, and removing light scale. Wire diameter falls in the 0.0100 to 0.0199-inch range, providing a balance between cut rate and surface finish.\u003c\/p\u003e\n\u003cp\u003eThis brush is intended for use on steel substrates in fabrication, maintenance, and welding applications. It installs on standard die grinders equipped with a 1\/4-inch collet. Stainless steel fill material resists contamination of the workpiece, which is important when working on stainless or other alloys where carbon steel wire contact is unacceptable. Typical use cases include weld prep, post-weld cleanup, rust removal, and surface conditioning in both shop and field environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCrimped stainless steel wire conforms to irregular surfaces for consistent contact\u003c\/li\u003e\n  \u003cli\u003e25,000 RPM maximum speed rating matches common die grinder operating ranges\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch shank included for direct mounting to die grinders with no adapter needed\u003c\/li\u003e\n  \u003cli\u003e2-inch outside diameter and 5\/8-inch face width suit tight-clearance applications\u003c\/li\u003e\n  \u003cli\u003eStainless steel fill prevents carbon contamination on sensitive workpieces\u003c\/li\u003e\n  \u003cli\u003eWire diameter range of 0.0100 to 0.0199 inches balances aggression and finish quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with die grinders accepting a 1\/4-inch shank. Intended for material application on steel.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified tradespeople or experienced operators familiar with rotary abrasive tooling. Always confirm the die grinder maximum RPM rating meets or exceeds the brush rating of 25,000 RPM before mounting. Power down and disconnect the tool from the air supply or electrical source before installing or removing the brush. Operators should wear appropriate PPE including eye protection and gloves, and ensure the work area is clear of personnel before operating at speed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 25,000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Crimped\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilament Wire Diameter Range\u003c\/strong\u003e: 0.0100 to 0.0199 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Included\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMachine Compatibility\u003c\/strong\u003e: Die Grinder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Shank\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.22 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WALTER SURFACE TECHNOLOGIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 13C170\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WALTER","offers":[{"title":"Default Title","offer_id":67907419668786,"sku":"13C170","price":27.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/424aa49ec19122cf17b4be2c66f2e247.jpg?v=1791179144","url":"https:\/\/voomisupply.com\/products\/walter-surface-technologies-13c170-wheel-brush-2-in","provider":"Voomi Supply","version":"1.0","type":"link"}