{"product_id":"walter-surface-technologies-10q143-type-1-cut-off-wheel","title":"Walter Surface Technologies 10Q143 Type 1 Cut-off Wheel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe WALTER SURFACE TECHNOLOGIES 10Q143 is a Type 1 (01\/41) flat cut-off wheel engineered for aggressive cutting on chop saws and similar stationary abrasive cutting equipment. Built from aluminum oxide abrasive with a resinoid bond and reinforced construction, this 30-grit wheel delivers fast, consistent cuts through ferrous metals and structural stock. It measures 14 inches in diameter and 3\/32 inches thick with a 1-inch arbor hole, and it is rated to a maximum of 4,400 RPM. The black resinoid-bonded matrix resists heat buildup during extended use, helping maintain cut quality across repeated passes.\u003c\/p\u003e\n\u003cp\u003eThis wheel is designed for use with chop saws in industrial, fabrication, and trade-shop environments. Typical applications include cutting rebar, angle iron, pipe, and structural steel in commercial construction, metal fabrication shops, and mechanical contracting settings. The 14-inch diameter and 30-grit rating make it suited for high-material-removal cuts where surface finish is secondary to throughput speed. It is sold individually with a minimum order quantity of 10 units.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eType 1 (01\/41) flat wheel profile for straight, plunge, and chop-saw cutting operations\u003c\/li\u003e\n  \u003cli\u003e30-grit aluminum oxide abrasive for high material-removal rate on ferrous metals\u003c\/li\u003e\n  \u003cli\u003eResinoid bond with reinforced construction for durability under repeated load\u003c\/li\u003e\n  \u003cli\u003e4,400 RPM maximum rated speed for compatibility with standard chop saw spindles\u003c\/li\u003e\n  \u003cli\u003e14-inch diameter and 3\/32-inch thickness for deep, precise cuts with minimal kerf waste\u003c\/li\u003e\n  \u003cli\u003eA30 specification designation for consistent abrasive grade and bond identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with chop saws accepting a 14-inch diameter, Type 1 cut-off wheel with a 1-inch arbor hole and a maximum spindle speed at or above 4,400 RPM. Verify that the saw's rated spindle speed does not exceed the wheel's 4,400 RPM maximum before mounting.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eCut-off wheels must be mounted and changed by qualified personnel familiar with ANSI B7.1 safety standards for the use, care, and protection of abrasive wheels. Always power down and de-energize the chop saw and allow the spindle to come to a full stop before removing or installing a wheel. Inspect the wheel for cracks, chips, or damage before each use and never operate a damaged or deformed wheel. Confirm the arbor hole, flange size, and machine RPM rating are compatible before mounting.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel Type\u003c\/strong\u003e: Type 1 (01\/41)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel Diameter\u003c\/strong\u003e: 14 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel Thickness\u003c\/strong\u003e: 3\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Size\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAbrasive Material\u003c\/strong\u003e: Aluminum Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrit\u003c\/strong\u003e: 30\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBond Type\u003c\/strong\u003e: Resinoid\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e: Reinforced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 4,400\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWheel Color\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecification Grade\u003c\/strong\u003e: A30\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 14.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WALTER SURFACE TECHNOLOGIES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10Q143\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WALTER","offers":[{"title":"Default Title","offer_id":67948881183026,"sku":"10Q143","price":147.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/69d7ec325c5e39d28786985a8c3ec2ed.jpg?v=1791675768","url":"https:\/\/voomisupply.com\/products\/walter-surface-technologies-10q143-type-1-cut-off-wheel","provider":"Voomi Supply","version":"1.0","type":"link"}