{"product_id":"walter-8115568-turning-insert-cnmg432-mp5-wpp10g-carbide","title":"Walter 8115568 Turning Insert CNMG432-MP5 WPP10G Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe WALTER 8115568 is a CNMG432-MP5 WPP10G grade carbide turning insert designed for general-purpose metal cutting on CNC lathes and turning centers. It features a multilayer CVD coating of Al2O3, TiCN, and TiN over a WPP10G carbide substrate, targeting steel and cast iron workpieces. The 80-degree diamond shape (ISO code C) provides a strong cutting geometry with a negative rake angle of 15 degrees and a chamfered and honed cutting edge for controlled chip formation. Four cutting edges are available per insert, maximizing cost efficiency per edge. The MP5 chip breaker geometry supports turning, facing, and boring operations across a range of depths of cut. Licensed machinists and CNC operators in production and job shop environments are the primary users.\u003c\/p\u003e\u003cp\u003eThis insert is suited for medium to finish turning applications on steel (ISO material group P) and cast iron (ISO material group K). The WPP10G grade corresponds to ISO material grade P10, making it well-matched for continuous to light interrupted cuts on carbon steels, alloy steels, and grey or ductile cast iron. Typical applications include shaft turning, facing operations on chucked parts, and boring in lathe or turning center setups. The neutral hand orientation allows use in standard right-hand toolholders with CNMG-style pockets. Both ANSI and ISO standard toolholder seating applies.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMultilayer CVD coating: Al2O3, TiCN, and TiN for heat resistance and wear life on steel and cast iron\u003c\/li\u003e\n\u003cli\u003eWPP10G grade carbide substrate, ISO material grade P10, optimized for steel cutting\u003c\/li\u003e\n\u003cli\u003e80-degree diamond insert shape with negative rake and chamfered and honed cutting edge for edge strength\u003c\/li\u003e\n\u003cli\u003eMP5 chip breaker geometry supports turning, facing, and boring in a single insert style\u003c\/li\u003e\n\u003cli\u003eFour usable cutting edges per insert with clamp and pin holding method\u003c\/li\u003e\n\u003cli\u003eConforms to ANSI and ISO standards; ISO designation CNMG120408-MP5 WPP10G\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNMG-style toolholders accepting a 432 insert size with clamp or pin holding. Compatible with standard ANSI and ISO CNMG toolholder pockets. Primary workpiece material is steel (ISO group P); secondary workpiece material is cast iron (ISO group K). Multi-use application covers turning, facing, and boring operations.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or CNC tooling technicians following standard insert indexing procedures. Power down and lock out the spindle before seating or indexing the insert. Ensure the toolholder pocket and seating surface are clean and free of chips before clamping. Verify clamp and pin engagement per toolholder manufacturer torque guidance; do not overtighten to avoid insert fracture.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: CNMG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: CNMG432-MP5 WPP10G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: CNMG120408-MP5 WPP10G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: WPP10G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: P10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: CVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Finish\u003c\/strong\u003e: Al2O3, TiCN, TiN (Multilayer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Diamond (80 degrees)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape Code\u003c\/strong\u003e: C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: MP5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: N\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Chamfered and Honed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5000 inches (1\/2 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.5080 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1875 inches (3\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0315 inches (1\/32 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2030 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.5080 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp, Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (Code P)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Cast Iron (Code K)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Use Application\u003c\/strong\u003e: Turning, Facing, Boring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: WALTER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 8115568\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WALTER","offers":[{"title":"Default Title","offer_id":52121144066354,"sku":"8115568","price":35.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0ecaa17538b9ccd735185daac0e94e32_1eeb9940-ef82-49e2-8a54-41360400859a.jpg?v=1790084269","url":"https:\/\/voomisupply.com\/products\/walter-8115568-turning-insert-cnmg432-mp5-wpp10g-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}