{"product_id":"vlier-h64-threaded-spring-plunger-3-4-10-steel-body","title":"Vlier H64 Threaded Spring Plunger 3\/4-10 Steel Body","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VLIER H64 is a standard threaded spring plunger designed for indexing, positioning, and light-duty holding applications in industrial assemblies. The steel-body plunger threads into a tapped hole using a 3\/4-10 UNC thread and delivers a controlled spring force through a steel nose. Initial end force is 6.7 pounds, middle end force is 22 pounds, and final end force is 33.3 pounds, giving installers a predictable force progression as the plunger is engaged. The 3\/8-inch hex drive allows installation and removal with standard hand tools. No locking element is included in this configuration.\u003c\/p\u003e\u003cp\u003eThe H64 is suited for use in machine fixtures, tooling plates, jigs, assembly workholding, and any application where repeatable detent or positioning force is needed. The steel nose and steel body make it appropriate for moderate-load industrial environments. The standard plunger length type fits conventional tapped-hole installations without custom modification. This plunger is typically installed by machinists, toolmakers, or maintenance technicians during fixture fabrication or equipment assembly.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/4-10 UNC thread for installation in standard tapped holes\u003c\/li\u003e\n\u003cli\u003e1-3\/4 inch thread length and 1-3\/4 inch body length for full-depth engagement\u003c\/li\u003e\n\u003cli\u003e5\/16 inch nose projection provides positive detent travel\u003c\/li\u003e\n\u003cli\u003eSteel body and steel nose for durability in industrial environments\u003c\/li\u003e\n\u003cli\u003e6.7 pound initial end force and 37.3 pound final end force for controlled spring resistance\u003c\/li\u003e\n\u003cli\u003e3\/8 inch hex drive allows installation with a standard wrench or hex key\u003c\/li\u003e\n\u003cli\u003eNo locking element  -  standard non-locking configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or new-installation threaded spring plunger for fixtures, tooling, and assemblies with a 3\/4-10 UNC tapped hole and sufficient depth to accept a 1-3\/4 inch thread length.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation requires a properly tapped 3\/4-10 UNC hole with adequate depth to accept the full thread length. Use the 3\/8 inch hex drive to thread the plunger in by hand or with a wrench, taking care not to overtighten and damage the spring or nose. Verify plunger projection and spring force are appropriate for the intended detent load before final assembly. No special certifications or trade licensing are required for installation in typical industrial fixture applications.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/4-10 UNC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Length\u003c\/strong\u003e: 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Length\u003c\/strong\u003e: 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlunger Projection\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 0.2150 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial End Force\u003c\/strong\u003e: 6.7 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMiddle End Force\u003c\/strong\u003e: 22 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal End Force\u003c\/strong\u003e: 37.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex Size\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking Element\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlunger Length Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VLIER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H64\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VLIER","offers":[{"title":"Default Title","offer_id":52008685568306,"sku":"H64","price":54.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3442927c05b358bcefa3f2c6e4f0beef.jpg?v=1790002544","url":"https:\/\/voomisupply.com\/products\/vlier-h64-threaded-spring-plunger-3-4-10-steel-body","provider":"Voomi Supply","version":"1.0","type":"link"}