{"product_id":"vermont-gage-112216200-class-zz-minus-plug-pin-gage-16-20mm","title":"Vermont Gage 112216200 Class Zz Minus Plug Pin Gage 16.20mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VERMONT GAGE 112216200 is a Class ZZ Minus plug pin gage machined for NoGo inspection work. It measures 16.20 mm in diameter with a tolerance of 0.00508 mm, giving inspectors and machinists a precise reference for verifying that bored holes, reamed openings, and machined features do not exceed the high limit of a tolerance band. The steel construction and 10 micro-inch finish support consistent, repeatable contact across service life. A Certificate of Accuracy with NIST traceability is included, satisfying quality-system documentation requirements in shop and lab environments.\u003c\/p\u003e\n\u003cp\u003eThis pin gage is used in dimensional inspection routines where a NoGo member is needed to confirm a feature is within tolerance. Typical applications include production floor inspection of machined parts, setup verification for bore gauging, and calibration checks of micrometers, verniers, and other measuring devices. The 2-inch overall length fits standard gage-handle holders and pin gage sets, making it straightforward to integrate into an existing inspection workflow.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eClass ZZ Minus tolerance class for NoGo inspection applications\u003c\/li\u003e\n  \u003cli\u003e16.20 mm measurement diameter with 0.00508 mm tolerance\u003c\/li\u003e\n  \u003cli\u003eSteel construction with 10 micro-inch surface finish for consistent contact\u003c\/li\u003e\n  \u003cli\u003e2-inch overall length fits standard gage handle holders\u003c\/li\u003e\n  \u003cli\u003eIncludes Certificate of Accuracy with NIST traceability for quality-system documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use as a NoGo plug gage member in dimensional inspection of bored, reamed, or machined features at 16.20 mm nominal diameter. Compatible with standard gage handle holders that accept pin gages of this diameter range. Also suitable for setting and verifying micrometers, verniers, and other measuring devices.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePin gages are handled and stored by metrology technicians, quality inspectors, and toolroom machinists. Keep the gage lightly oiled and stored in its case when not in use to prevent corrosion and surface damage. Never force a plug gage into a feature; hand pressure only is appropriate for all Go and NoGo gaging operations. Verify the gage is at thermal equilibrium with the workpiece before use to avoid measurement error from temperature differential.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter of Measurement\u003c\/strong\u003e: 16.20 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance\u003c\/strong\u003e: 0.00508 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.18 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: 10 Micro-inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGage Class\u003c\/strong\u003e: ZZ Minus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: NoGo inspection, setting micrometers, verniers, and other measuring devices\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes\u003c\/strong\u003e: Certificate of Accuracy with NIST Traceability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VERMONT GAGE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 112216200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VERMONT GAGE","offers":[{"title":"Default Title","offer_id":51744232735026,"sku":"112216200","price":17.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1cf04934d75d3eb37d973f6ea4b25c4d_a2b45c0d-a779-47fb-ae30-7ccd4ea1ca2f.jpg?v=1788855220","url":"https:\/\/voomisupply.com\/products\/vermont-gage-112216200-class-zz-minus-plug-pin-gage-16-20mm","provider":"Voomi Supply","version":"1.0","type":"link"}