{"product_id":"vargus-80241-thread-mill-10-32-6-32-3-flutes-solid-carbide","title":"Vargus 80241 Thread Mill 10-32 6-32 3 Flutes Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VARGUS 80241 is a straight flute thread mill designed for cutting internal threads in a single helical pass. Built from solid carbide, it produces UNC and UNF thread profiles in both 10-32 and 6-32 configurations using a single tool. The 3-flute geometry provides stable cutting action while the bright, uncoated finish suits a wide range of workpiece materials. With a 0.1-inch cutting diameter and a 0.292-inch length of cut, this tool is well suited to small-diameter thread milling applications where tap breakage is a concern or thread tolerance is critical.\u003c\/p\u003e\u003cp\u003eThis thread mill is intended for use in CNC machining centers capable of helical interpolation. It is a common choice for production shops, tool and die work, and any application where threading small holes in hard or difficult-to-tap materials is required. The 1\/4-inch shank diameter fits standard collet chucks and shrink-fit holders. At 2.244 inches overall length, it provides adequate reach for typical through-hole and blind-hole thread milling operations in ferrous and non-ferrous materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCuts both 10-32 and 6-32 internal thread sizes with a single tool\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in CNC applications\u003c\/li\u003e\n\u003cli\u003e3-flute straight flute design for stable, chatter-resistant cutting\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish compatible with a broad range of workpiece materials\u003c\/li\u003e\n\u003cli\u003eNo coolant-through requirement simplifies setup on standard machining centers\u003c\/li\u003e\n\u003cli\u003e32 TPI with UNC and UNF thread standard compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for CNC machining centers capable of helical interpolation. Compatible with standard 1\/4-inch collet chucks and shrink-fit toolholders. Suitable for cutting 10-32 and 6-32 internal threads to UNC and UNF standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThread milling requires a CNC control with helical interpolation capability. Program the tool path according to the thread pitch and nominal diameter before running. Verify spindle speed and feed rate against the tool manufacturer's recommendations for the specific workpiece material. Inspect the tool for chipping before each use, as carbide thread mills are sensitive to re-cutting chips in blind-hole applications.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Sizes\u003c\/strong\u003e: 10-32, 6-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: Internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: UNC, UNF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch\u003c\/strong\u003e: 32 TPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches (1\/4 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.292 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.244 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright, Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStaggered Tooth\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242117\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VARGUS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 80241\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VARGUS","offers":[{"title":"Default Title","offer_id":67910960415026,"sku":"80241","price":251.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/76c281d8453a2ac9fe0b53b91f1505f9.jpg?v=1791202216","url":"https:\/\/voomisupply.com\/products\/vargus-80241-thread-mill-10-32-6-32-3-flutes-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}