{"product_id":"value-collection-zmscv70210-viton-o-ring-dash-210-100-pack","title":"Value Collection ZMSCV70210 Viton O-ring Dash 210 100 Pack","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCV70210 is a Dash 210 Viton (fluoroelastomer) O-ring sized at 0.750 inches inside diameter, 1.000 inches outside diameter, and 0.125 inches thick with a round cross section. Rated at 70 Shore A hardness, this O-ring handles operating temperatures from -15 degrees F to 400 degrees F, making it a strong fit for high-temperature sealing applications. It is sold in packs of 100. Plumbers, HVAC technicians, and industrial maintenance trades use fluoroelastomer O-rings where standard nitrile or EPDM compounds fall short due to heat or chemical exposure.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is appropriate for use in petroleum-based fluid systems, hydraulic circuits, fuel handling assemblies, and vacuum service applications. Its fluoroelastomer compound provides low gas permeability, making it a reliable choice for sealed systems where diffusion is a concern. The Dash 210 designation follows standard AS568 sizing and is commonly encountered in fittings, valves, pumps, and manifold assemblies across residential, commercial, and light industrial settings.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFluoroelastomer (Viton-type) compound with wide chemical compatibility including petroleum products\u003c\/li\u003e\n  \u003cli\u003eOperating range of -15 degrees F to 400 degrees F for high-temperature service\u003c\/li\u003e\n  \u003cli\u003e70 Shore A hardness rated Hard for firm sealing under compression\u003c\/li\u003e\n  \u003cli\u003eLow compression set helps maintain seal integrity over extended service cycles\u003c\/li\u003e\n  \u003cli\u003eLow gas permeability makes this suitable for vacuum and sealed-gas applications\u003c\/li\u003e\n  \u003cli\u003eRound cross section, AS568 Dash 210 standard sizing for consistent fit in standard O-ring grooves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or service O-ring for valves, fittings, pumps, and assemblies using AS568 Dash 210 standard O-ring grooves where a fluoroelastomer compound is specified. Compatible with petroleum products and a wide spectrum of chemicals; not FDA approved for food or pharmaceutical contact.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by plumbers, HVAC technicians, or industrial maintenance mechanics. Depressurize and drain the system before removing any fitting or valve containing the existing O-ring. Inspect the groove for nicks or corrosion before seating the new O-ring, and avoid twisting or rolling the O-ring during installation. Use only lubricants compatible with fluoroelastomer compounds and the media being sealed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Fluoroelastomer (Viton-type)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 210\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.750 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1.000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 70 Shore A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness Rating\u003c\/strong\u003e: Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -15 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Media\u003c\/strong\u003e: Petroleum Products\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31401503\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCV70210\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51698021499186,"sku":"ZMSCV70210","price":40.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a46dfe99fe6fb95f9f454f6c4597e3e7.jpg?v=1788356827","url":"https:\/\/voomisupply.com\/products\/value-collection-zmscv70210-viton-o-ring-dash-210-100-pack","provider":"Voomi Supply","version":"1.0","type":"link"}