{"product_id":"value-collection-zmscv70201-viton-o-ring-dash-201-25-pack","title":"Value Collection ZMSCV70201 Viton O-ring Dash 201 25-pack","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCV70201 is a Dash 201 Viton (fluoroelastomer) O-ring sold in a pack of 25. It features a round cross section with an inside diameter of 0.188 inches, an outside diameter of 0.438 inches, and a thickness of 0.125 inches. The fluoroelastomer compound delivers a hardness rating of 70 Shore A, a minimum working temperature of -15 degrees F, and a maximum working temperature of 400 degrees F. These O-rings are suited for static and dynamic sealing applications where exposure to petroleum products, high heat, or a wide range of chemicals is expected. Licensed plumbers, HVAC technicians, and mechanical contractors install these as sealing elements in hydraulic, pneumatic, and fluid-handling systems.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is well matched to applications involving petroleum-based fluids, fuels, oils, and hydraulic media. The fluoroelastomer material provides low gas permeability, making it a practical choice for vacuum service and low-emission sealing. The Dash 201 designation follows AS568 standard sizing, allowing straightforward cross-referencing to OEM groove specifications in residential and commercial mechanical systems. The pack quantity of 25 supports both single repairs and scheduled maintenance stock.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFluoroelastomer (Viton-type) material rated for continuous service up to 400 degrees F\u003c\/li\u003e\n  \u003cli\u003eDash 201 AS568 standard sizing: 0.188 inches ID, 0.438 inches OD, 0.125 inches thick\u003c\/li\u003e\n  \u003cli\u003e70 Shore A hardness with low compression set for sustained sealing force\u003c\/li\u003e\n  \u003cli\u003eGood resistance to petroleum products, fuels, and oils\u003c\/li\u003e\n  \u003cli\u003eLow gas permeability suitable for vacuum service applications\u003c\/li\u003e\n  \u003cli\u003eRound cross section for compatibility with standard O-ring grooves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard Dash 201 AS568-sized O-ring for use in any groove machined to accept a 0.188-inch ID, 0.438-inch OD, 0.125-inch cross-section seal in petroleum-compatible fluid or gas systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePower down or depressurize the system fully before replacing any O-ring seal. Inspect the groove for nicks, corrosion, or debris that could cause premature seal failure. Apply a compatible lubricant to ease installation and prevent twisting of the cross section during assembly. Follow applicable mechanical codes and the equipment manufacturer's torque and assembly specifications for the mating hardware.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Fluoroelastomer (Viton-type)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 201\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.188 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.438 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 70 Shore A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness Rating\u003c\/strong\u003e: Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -15 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Media\u003c\/strong\u003e: Petroleum Products\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 25\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31401503\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCV70201\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51720821637426,"sku":"ZMSCV70201","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/79b373b8c03b38e35d826e368b709ec3.jpg?v=1788569561","url":"https:\/\/voomisupply.com\/products\/value-collection-zmscv70201-viton-o-ring-dash-201-25-pack","provider":"Voomi Supply","version":"1.0","type":"link"}