{"product_id":"value-collection-zmscv70038-viton-o-ring-dash-038-pack-of-10","title":"Value Collection ZMSCV70038 Viton O-ring Dash 038 Pack of 10","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCV70038 is a Dash 038 Viton fluoroelastomer O-ring designed for sealing applications that demand high temperature resistance and broad chemical compatibility. With a 2.625-inch inside diameter, a 2.75-inch outside diameter, and a cross-section thickness of 0.0625 inches, this O-ring fits standard Dash 038 groove dimensions. Rated to 400 degrees F maximum and -15 degrees F minimum, the fluoroelastomer compound delivers low compression set and low gas permeability. It is sold in a package of 10 and is the correct choice wherever petroleum-based fluids, high heat, or vacuum service are factors in the sealing environment.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is suited for HVAC, refrigeration, plumbing, and industrial fluid-system applications where standard rubber compounds fall short. Typical uses include pump seals, valve stems, compressor fittings, and hydraulic connections exposed to petroleum products or elevated operating temperatures. The fluoroelastomer material provides a wide spectrum of chemical compatibility, making it a reliable choice for both residential and light commercial service work. Plumbers, HVAC technicians, and industrial maintenance professionals routinely use Dash 038 O-rings as replacement seals during component service or overhaul.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFluoroelastomer (Viton-type) compound rated from -15 degrees F to 400 degrees F\u003c\/li\u003e\n  \u003cli\u003eDash 038 sizing: 2.625 inches ID, 2.75 inches OD, 0.0625 inches thick\u003c\/li\u003e\n  \u003cli\u003eRound cross-section profile for consistent groove seating and uniform compression\u003c\/li\u003e\n  \u003cli\u003eLow compression set for long-term sealing integrity under sustained load\u003c\/li\u003e\n  \u003cli\u003eGood resistance to petroleum products and compatible with a wide range of chemicals\u003c\/li\u003e\n  \u003cli\u003eSuitable for vacuum service due to low gas permeability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard Dash 038 replacement O-ring compatible with applications involving petroleum products and requiring high temperature resistance up to 400 degrees F. Confirm groove dimensions before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePower down or depressurize the system completely before replacing any O-ring seal. Inspect the mating groove and sealing surface for nicks, corrosion, or debris that could compromise the new seal. Lubricate the O-ring lightly with a compatible fluid or grease before seating to prevent tearing during assembly. Installation should be performed by a qualified tradesperson following applicable code requirements such as NEC, IPC, or IFGC depending on the system type.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Fluoroelastomer (Viton-type)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 038\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 2.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 2.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.0625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross-Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 70 (Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -15 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Media\u003c\/strong\u003e: Petroleum Products\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCV70038\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51700349403442,"sku":"ZMSCV70038","price":15.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ce75b44a5d7276562ec02e740bfb90fe.jpg?v=1788389264","url":"https:\/\/voomisupply.com\/products\/value-collection-zmscv70038-viton-o-ring-dash-038-pack-of-10","provider":"Voomi Supply","version":"1.0","type":"link"}