{"product_id":"value-collection-zmscs70232-silicone-o-ring-dash-232-10-pack","title":"Value Collection ZMSCS70232 Silicone O-ring Dash 232 10-pack","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCS70232 is a Dash 232 silicone O-ring designed for static and dynamic sealing applications across HVAC, plumbing, and industrial fluid systems. It measures 2.75 inches inside diameter, 3.0 inches outside diameter, and 0.125 inches thick, with a round cross section and a Shore 70 hardness rating. The silicone compound delivers a wide service temperature range from -80 degrees F to 450 degrees F, making it well suited for high-heat and outdoor environments where standard nitrile or EPDM compounds fall short. Licensed tradespeople and maintenance technicians install this part when replacing worn or damaged seals in piping, equipment housings, and valve assemblies. Each package contains 10 rings.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is appropriate for residential and commercial applications where the sealing surface is exposed to dry heat, ozone, and weathering. The silicone material offers good resistance to a broad range of chemicals and solvents, though its oil resistance is limited. Typical installation scenarios include equipment flanges, pump covers, access panels, and threaded fittings where a Dash 232 cross-section seal is specified. Installers should confirm fluid media compatibility before use, particularly in oil-rich or fuel-contact environments where a different compound may be required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eWide temperature range: -80 degrees F to 450 degrees F for high-heat and cold-climate service\u003c\/li\u003e\n  \u003cli\u003eRound cross section with Shore 70 hardness for consistent sealing pressure\u003c\/li\u003e\n  \u003cli\u003eGood resistance to weathering, ozone, and a broad range of chemicals and solvents\u003c\/li\u003e\n  \u003cli\u003eLimited oil resistance — verify compatibility before use in oil or fuel contact applications\u003c\/li\u003e\n  \u003cli\u003eWhite silicone compound; non-FDA approved\u003c\/li\u003e\n  \u003cli\u003eSold in a 10-ring package with a minimum order quantity of 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard Dash 232 O-ring replacement for any application specifying a 2.75-inch ID, 3.0-inch OD, 0.125-inch thick round cross-section seal in silicone compound.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed plumbers, HVAC technicians, or industrial maintenance mechanics. Always depressurize and isolate the system before replacing any O-ring seal. Inspect the groove and mating surfaces for nicks, burrs, or corrosion that could compromise the seal. Avoid over-stretching the ring during installation, and do not use sharp tools that may nick the sealing surface.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: White\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 232\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 2.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 3.0 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 70 Shore (Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -80 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 450 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Media\u003c\/strong\u003e: Oils, Chemicals, Solvents (limited oil resistance — verify application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31401503\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCS70232\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51695839969586,"sku":"ZMSCS70232","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d07c30dd8efcd500b8bb1759bdfbae86_78607860-63bb-4d54-9eb5-3d27deab0b2d.jpg?v=1788338690","url":"https:\/\/voomisupply.com\/products\/value-collection-zmscs70232-silicone-o-ring-dash-232-10-pack","provider":"Voomi Supply","version":"1.0","type":"link"}