{"product_id":"value-collection-zmscqh70110-o-ring-dash-110-nbr-70a-pack-100","title":"Value Collection ZMSCQH70110 O-ring Dash 110 Nbr 70A Pack 100","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCQH70110 is a Dash 110 O-ring with a Quattro X cross section, manufactured from nitrile butadiene rubber (NBR) at 70 Shore A durometer. It measures 0.375 inches inside diameter, 0.563 inches outside diameter, and 0.0937 inches thick. The X-profile cross section provides four sealing lobes instead of the traditional round, improving seal integrity under dynamic and static load conditions. Rated for service from -30 degrees F to 250 degrees F, this O-ring suits fluid and pneumatic sealing applications across HVAC, plumbing, and hydraulic systems. Each package contains 100 pieces sold as a unit.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is well suited for residential and light commercial applications where NBR material is appropriate — including refrigerant line fittings, water and hydraulic fluid connections, and pneumatic port sealing. The Dash 110 size is a common ANSI standard dimension used throughout HVAC, plumbing, and fluid power equipment. Licensed tradespeople and MRO professionals install these during routine seal replacement, valve service, and fitting assembly. The X cross section makes it a functional upgrade over standard round-profile O-rings in the same dash size where groove geometry permits.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eQuattro X cross section provides four-lobe sealing geometry for improved static and dynamic seal performance\u003c\/li\u003e\n  \u003cli\u003eNitrile butadiene rubber (NBR) construction resists petroleum-based fluids, water, and hydraulic oils\u003c\/li\u003e\n  \u003cli\u003e70 Shore A durometer rated Hard — suitable for moderate-pressure sealing applications\u003c\/li\u003e\n  \u003cli\u003eOperating range of -30 degrees F to 250 degrees F covers most HVAC, plumbing, and fluid power service conditions\u003c\/li\u003e\n  \u003cli\u003eANSI Dash 110 standard size for drop-in replacement of worn or damaged O-rings in matching grooves\u003c\/li\u003e\n  \u003cli\u003ePackage of 100 units supports bench stock, service van inventory, and production line use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard Dash 110 ANSI O-ring replacement for any application requiring a 0.375-inch ID nitrile seal with X cross section profile and a 70 Shore A durometer rating.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eO-ring installation is performed by licensed plumbers, HVAC technicians, and hydraulic technicians depending on the application. Always depressurize and de-energize the system before removing or replacing seals. Clean the groove of debris and inspect for groove damage before seating the new O-ring. Avoid twisting the O-ring during installation; a light application of compatible lubricant helps seat the seal without distortion.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.563 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.0937 inches (3\/32 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 110\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: X (Quattro)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nitrile Butadiene Rubber (NBR)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurometer Shore A\u003c\/strong\u003e: 70\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness Rating\u003c\/strong\u003e: Hard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -30 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100 pieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCQH70110\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51721059238194,"sku":"ZMSCQH70110","price":21.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a06e872bee120ea4b214bc69f91045cc.jpg?v=1788572953","url":"https:\/\/voomisupply.com\/products\/value-collection-zmscqh70110-o-ring-dash-110-nbr-70a-pack-100","provider":"Voomi Supply","version":"1.0","type":"link"}