{"product_id":"value-collection-zmsch90130-o-ring-dash-130-nbr-90-duro","title":"Value Collection ZMSCH90130 O-ring Dash 130 Nbr 90 Duro","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION ZMSCH90130 is a Dash 130 nitrile butadiene rubber (NBR) O-ring designed for fluid sealing applications in plumbing, HVAC, and hydraulic systems. It measures 1.625 inches inside diameter, 1.813 inches outside diameter, and 0.094 inches thick with a round cross section. Rated at 90 durometer (extra hard), this O-ring handles a working temperature range of -40 degrees F to 250 degrees F. NBR is the most widely used elastomer for O-ring applications, offering excellent resistance to petroleum-based fluids, strong compression set performance, and good tear and abrasion resistance. Licensed plumbers, HVAC technicians, and hydraulic system technicians commonly specify this grade.\u003c\/p\u003e\u003cp\u003eThis O-ring is suited for use wherever petroleum-based fluids, oils, fuels, or hydraulic fluids are present. Typical applications include pump seals, valve stems, fittings, and fluid connectors in residential and light commercial mechanical systems. The extra-hard 90 durometer rating makes it appropriate for higher-pressure sealing environments where a softer compound would extrude or deform under load. Sold in packages of 50, it is a practical stocking item for shops and service vehicles. Note: this compound is not intended for use with ozone-generating environments, direct sunlight exposure, or near electric motors without proper shielding.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNBR compound provides excellent resistance to petroleum products, oils, and fuels\u003c\/li\u003e\n\u003cli\u003e90 durometer extra-hard rating resists extrusion in higher-pressure sealing applications\u003c\/li\u003e\n\u003cli\u003eOperating range of -40 degrees F to 250 degrees F suits a wide range of mechanical systems\u003c\/li\u003e\n\u003cli\u003eRound cross section, Dash 130 standard sizing for drop-in replacement use\u003c\/li\u003e\n\u003cli\u003eMeets SAE and MIL-Spec standards\u003c\/li\u003e\n\u003cli\u003eSold in quantities of 50 per package, minimum order quantity of 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with petroleum products and petroleum-based hydraulic fluids. Conforms to Dash 130 O-ring sizing per SAE and MIL-Spec standards. Should not be used with ozone-generating equipment or stored in direct sunlight.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by licensed plumbers, HVAC technicians, or hydraulic system mechanics. Always depressurize and isolate the fluid circuit before removing or installing any O-ring. Inspect the groove and mating surfaces for burrs or corrosion before seating the new O-ring. Lightly lubricate with a compatible petroleum-based lubricant during installation to prevent rolling or tearing.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 1.625 inches (40.94 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1.813 inches (46.05 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.094 inches (2.62 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 130\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nitrile Butadiene Rubber (Buna-N)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 90 Durometer (Extra Hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Fluids\u003c\/strong\u003e: Petroleum products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE, MIL-Spec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.93 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCH90130\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51690050453810,"sku":"ZMSCH90130","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d7ad7ea8070dfb556d5b1f970a3f64dd.jpg?v=1788266157","url":"https:\/\/voomisupply.com\/products\/value-collection-zmsch90130-o-ring-dash-130-nbr-90-duro","provider":"Voomi Supply","version":"1.0","type":"link"}