{"product_id":"value-collection-zmsch90005-o-ring-dash-005-nbr-100-pack","title":"Value Collection ZMSCH90005 O-ring Dash 005 Nbr 100-pack","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCH90005 is a Dash 005 Nitrile Butadiene Rubber (NBR) O-ring packaged in a quantity of 100. It measures 0.109 inches inside diameter, 0.234 inches outside diameter, and 0.0625 inches thick, with a 90 durometer hardness rating — classified as extra hard. NBR is the most widely used O-ring elastomer in the trade, offering excellent resistance to petroleum products, strong compression set performance, and solid tear and abrasion resistance. This O-ring is sized per standard Dash 005 designation and meets SAE and MIL-Spec standards. Licensed plumbers, HVAC technicians, and industrial maintenance professionals install these in fluid and pneumatic systems where petroleum-based media are present.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is suited for residential and commercial sealing applications involving petroleum-based fluids, hydraulic systems, fuel lines, and pneumatic fittings. The 90 durometer hardness makes it appropriate for higher-pressure sealing scenarios where a softer compound would extrude or deform. The operating temperature range of -40 to 250 degrees F covers most HVAC, plumbing, and mechanical system environments. The 100-piece pack is practical for service technicians who routinely stock common O-ring sizes for field repairs and preventive maintenance.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDash 005 standard sizing: 0.109 inches ID, 0.234 inches OD, 0.0625 inches thick\u003c\/li\u003e\n  \u003cli\u003e90 durometer extra-hard hardness rating for high-pressure sealing applications\u003c\/li\u003e\n  \u003cli\u003eNitrile Butadiene Rubber compound with excellent petroleum product resistance\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range: -40 to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003eMeets SAE and MIL-Spec standards\u003c\/li\u003e\n  \u003cli\u003ePackaged in quantities of 100 for shop and field stocking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with petroleum products, hydraulic fluids, and similar media in standard Dash 005 O-ring grooves. Not FDA approved. Store away from direct sunlight, motors, and other electrical equipment that may generate ozone.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by licensed plumbers, HVAC technicians, or qualified maintenance personnel depending on the system. Always depressurize and drain the system before replacing O-rings. Inspect the groove and mating surfaces for wear or corrosion before installing. Apply a compatible lubricant to the O-ring during installation to reduce the risk of tearing or rolling in the groove.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.109 inches (0.0937 decimal inch \/ 2.57 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.234 inches (0.2187 decimal inch \/ 5.55 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.0625 inches (1.78 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 005\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nitrile Butadiene Rubber (Buna-N)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 90 durometer (Extra Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Media\u003c\/strong\u003e: Petroleum Products\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE, MIL-Spec\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCH90005\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51692752175410,"sku":"ZMSCH90005","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e63e5be40384736fb1f090e4d0cdd585_847cb484-dc4c-4b7d-80c9-2831867b28af.jpg?v=1788302261","url":"https:\/\/voomisupply.com\/products\/value-collection-zmsch90005-o-ring-dash-005-nbr-100-pack","provider":"Voomi Supply","version":"1.0","type":"link"}