{"product_id":"value-collection-zmsch70md108-o-ring-dash-108-nbr-25-pack","title":"Value Collection ZMSCH70MD108 O-ring Dash 108 Nbr 25-pack","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCH70MD108 is a Dash 108 nitrile butadiene rubber (NBR) O-ring with a 0.237-inch inside diameter, 0.437-inch outside diameter, and a 3\/32-inch (0.0937-inch) round cross section. Rated at 70 Shore A hardness, this black NBR O-ring operates across a temperature range of -40 degrees F to 250 degrees F. NBR is the most widely used O-ring elastomer in trade applications, valued for its excellent resistance to petroleum products, strong compression set performance, and solid tear and abrasion resistance. Each package contains 25 O-rings. Licensed plumbers, HVAC technicians, and mechanical contractors keep this size on hand for routine seal replacements in fluid and gas systems.\u003c\/p\u003e\n\u003cp\u003eThe ZMSCH70MD108 is suited for static and dynamic sealing applications in residential and commercial systems where contact with petroleum-based fluids is common. Typical use cases include hydraulic fittings, refrigerant service valves, fuel line connections, compressor ports, and general plumbing seal points. The Dash 108 designation is a standard AN\/MS sizing reference, making cross-referencing straightforward for techs sourcing replacements in the field. This O-ring is not FDA approved for food-contact applications. Note that NBR elastomers should not be stored in direct sunlight or near motors and other electrical equipment that may generate ozone.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eNitrile butadiene rubber construction with excellent resistance to petroleum products and hydraulic fluids\u003c\/li\u003e\n  \u003cli\u003e70 Shore A hardness rating — classified as hard — for reliable sealing under compression\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -40 degrees F to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003eRound cross section per Dash 108 standard sizing (0.237 inches ID x 0.437 inches OD x 0.0937 inches thick)\u003c\/li\u003e\n  \u003cli\u003eStrong tear and abrasion resistance for dynamic sealing environments\u003c\/li\u003e\n  \u003cli\u003eSold in a 25-piece package for stocking service vehicles and shop inventory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard Dash 108 O-ring replacement compatible with petroleum-based fluid systems. Verify inside diameter, outside diameter, and cross-section dimensions against the existing seal before installation. Not recommended for use with ozone-generating environments, direct sunlight exposure, or food-contact applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed plumbers, HVAC technicians, or mechanical contractors during routine service or component replacement. Always shut off fluid supply and relieve system pressure completely before removing the existing O-ring. Inspect the seating groove for nicks, corrosion, or debris before installing the new ring. Lightly lubricating the O-ring with a compatible petroleum-based lubricant during installation helps prevent twisting and ensures even seating.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nitrile Butadiene Rubber (NBR)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 108\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.237 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.437 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness (Cross Section)\u003c\/strong\u003e: 0.0937 inches (3\/32 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 70 Shore A (Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Media\u003c\/strong\u003e: Petroleum Products\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 25\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.16 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31401503\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCH70MD108\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51697435771186,"sku":"ZMSCH70MD108","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d07c30dd8efcd500b8bb1759bdfbae86_45047baf-8cde-4b9b-a199-a3115aff0087.jpg?v=1788351627","url":"https:\/\/voomisupply.com\/products\/value-collection-zmsch70md108-o-ring-dash-108-nbr-25-pack","provider":"Voomi Supply","version":"1.0","type":"link"}