{"product_id":"value-collection-zmsch70fda215-o-ring-dash-215-buna-n-fda","title":"Value Collection ZMSCH70FDA215 O-ring Dash 215 Buna-n Fda","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCH70FDA215 is a Dash 215 O-ring made from Buna-N (Nitrile Butadiene Rubber), one of the most widely used elastomers in fluid sealing applications. It features a round cross section with a 1.46-inch inside diameter, a 1.312-inch outside diameter, and a 0.125-inch (1\/8 inch) wall thickness. Rated at 70 Shore A hardness, this O-ring carries FDA approval and meets both SAE and MIL-Spec standards. It is sold in packages of 10 and is appropriate for plumbing, HVAC, and fluid system maintenance work performed by licensed trade professionals.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is suited for static and dynamic sealing applications where contact with petroleum-based fluids is expected. Its Buna-N construction delivers reliable resistance to oils, fuels, and hydraulic fluids across a wide service temperature range of -40 degrees F to 250 degrees F. The FDA-approved white compound makes it suitable for use in food-grade equipment and potable water systems where material compliance is required. Typical applications include valve stems, pump shafts, fittings, and manifold face seals in residential and commercial systems.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBuna-N (Nitrile Butadiene Rubber) construction with excellent resistance to petroleum products\u003c\/li\u003e\n  \u003cli\u003eFDA approved white compound suitable for food-grade and potable water applications\u003c\/li\u003e\n  \u003cli\u003eMeets SAE and MIL-Spec standards\u003c\/li\u003e\n  \u003cli\u003eWide service temperature range: -40 degrees F to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e70 Shore A hardness with strong compression set, tear, and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eRound cross section; Dash 215 dimensionally standardized profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with petroleum products and petroleum-based fluids. Designed as a standard Dash 215 O-ring replacement for use in valves, pumps, fittings, and fluid system components requiring a 1.46-inch ID seal with a 1\/8-inch cross section. Note: Buna-N should not be stored in direct sunlight or near motors or electrical equipment that may generate ozone.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eO-ring replacement is performed by plumbers, HVAC technicians, and fluid system mechanics. Always depressurize and isolate the system before removing the existing seal to prevent fluid release or injury. Inspect the seating groove for burrs or damage before installing the new O-ring, and apply a compatible lubricant to ease installation and reduce risk of tearing. Follow applicable IPC or IFGC guidelines for the system type being serviced.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Buna-N (Nitrile Butadiene Rubber)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 215\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 1.4600 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1.3120 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.1250 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 70 Shore A (Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Fluids\u003c\/strong\u003e: Petroleum Products\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: White\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE, MIL-Spec\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCH70FDA215\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51721515204914,"sku":"ZMSCH70FDA215","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d07c30dd8efcd500b8bb1759bdfbae86_6aa9dd5c-2329-4996-944b-32d819e6a0f8.jpg?v=1788578385","url":"https:\/\/voomisupply.com\/products\/value-collection-zmsch70fda215-o-ring-dash-215-buna-n-fda","provider":"Voomi Supply","version":"1.0","type":"link"}