{"product_id":"value-collection-zmsch70fda027-o-ring-dash-027-nbr-fda","title":"Value Collection ZMSCH70FDA027 O-ring Dash 027 Nbr Fda","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION ZMSCH70FDA027 is a Dash 027 nitrile butadiene rubber (NBR) O-ring with an inside diameter of 1.301 inches, an outside diameter of 1.438 inches, and a thickness of 0.0625 inches (1\/16 inch). It features a round cross section and a Shore A hardness rating of 70, placing it in the hard hardness category. This O-ring carries FDA approval and meets SAE and MIL-Spec standards, making it suitable for food-contact and regulated fluid-handling applications. Plumbers, HVAC technicians, and fluid-system mechanics install this type of seal to prevent leakage at joints, fittings, and valve bodies. Each package contains 10 O-rings.\u003c\/p\u003e\u003cp\u003eThis O-ring is designed for use with petroleum-based fluids and is rated for a working temperature range of -40 degrees F to 250 degrees F. NBR is the most widely used O-ring elastomer in trade applications because of its excellent resistance to petroleum products, strong compression set performance, and good tear and abrasion resistance. Typical installation locations include hydraulic fittings, fuel system connections, HVAC refrigerant-side components where NBR is appropriate, and plumbing valve assemblies. Note: this O-ring should not be stored in direct sunlight or near motors or other electrical equipment that may generate ozone, as ozone degrades NBR compounds.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFDA approved White BUNA material suitable for food-contact and regulated fluid-handling environments\u003c\/li\u003e\n\u003cli\u003eRated working temperature range of -40 degrees F to 250 degrees F\u003c\/li\u003e\n\u003cli\u003eShore A hardness of 70 for reliable compression set and sealing force\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to petroleum products with strong tear and abrasion resistance\u003c\/li\u003e\n\u003cli\u003eMeets SAE and MIL-Spec standards\u003c\/li\u003e\n\u003cli\u003eRound cross section; Dash 027 size for straightforward groove and fitting compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with petroleum-based products and fluids in standard Dash 027 O-ring groove applications. Designed as a direct-fit replacement for any system or fitting specifying a Dash 027 NBR O-ring with a 1.301-inch ID, 1.438-inch OD, and 0.0625-inch cross-section thickness.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by licensed plumbers, HVAC technicians, or hydraulic system mechanics. Always depressurize and isolate the fluid circuit before removing or installing O-rings. Lubricate the O-ring with a compatible fluid or O-ring lubricant prior to seating to prevent twisting and pinching during assembly. Follow applicable codes such as IPC or IFGC for plumbing and gas-system applications.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 1.301 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1.438 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.0625 inches (1\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 027\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nitrile Butadiene Rubber (NBR \/ BUNA)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness (Shore A)\u003c\/strong\u003e: 70\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness Rating\u003c\/strong\u003e: Hard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Fluids\u003c\/strong\u003e: Petroleum products\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE, MIL-Spec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.319 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31401503\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCH70FDA027\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51788004262194,"sku":"ZMSCH70FDA027","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d07c30dd8efcd500b8bb1759bdfbae86_80f66338-023c-4562-b9ec-094acc367f41.jpg?v=1789221530","url":"https:\/\/voomisupply.com\/products\/value-collection-zmsch70fda027-o-ring-dash-027-nbr-fda","provider":"Voomi Supply","version":"1.0","type":"link"}