{"product_id":"value-collection-zmsch70233-o-ring-dash-233-nbr-70","title":"Value Collection ZMSCH70233 O-ring Dash 233 Nbr 70","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCH70233 is a Dash 233 nitrile butadiene rubber (NBR\/Buna-N) O-ring with a round cross section, sized at 2.875 inches inside diameter, 3.125 inches outside diameter, and 0.125 inches thick. It carries a 70 Shore A durometer hardness rating, placing it in the hard hardness category. This O-ring seals fluid connections in hydraulic, pneumatic, and plumbing assemblies and is installed by plumbers, HVAC technicians, and industrial maintenance trades. Buna-N is the most widely used O-ring elastomer in the trade, valued for its excellent resistance to petroleum-based fluids, good compression set, and solid tear and abrasion resistance.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is suited for static and dynamic sealing applications involving petroleum products, oils, fuels, and hydraulic fluids. It operates across a temperature range of -40 degrees F to 250 degrees F, making it appropriate for a broad range of residential and commercial mechanical systems. Typical install scenarios include pump seals, valve bodies, pipe fittings, and fluid-line connections where a Dash 233 cross-section is specified. It is sold in packages of 50 pieces, making it practical for service trucks and shop stock.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBuna-N (NBR) elastomer offers excellent resistance to petroleum products, oils, and fuels\u003c\/li\u003e\n  \u003cli\u003e70 Shore A durometer hardness provides reliable sealing under compression\u003c\/li\u003e\n  \u003cli\u003eOperating range of -40 degrees F to 250 degrees F suits most mechanical service environments\u003c\/li\u003e\n  \u003cli\u003eRound cross section conforms to Dash 233 industry-standard sizing\u003c\/li\u003e\n  \u003cli\u003eGood tear and abrasion resistance extends service life in dynamic applications\u003c\/li\u003e\n  \u003cli\u003eMeets SAE and MIL-Spec standards; sold in 50-piece packages for shop and field stocking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard Dash 233 O-ring replacement compatible with petroleum-based fluid systems. Not FDA approved; not recommended for use with ozone-generating environments or direct sunlight exposure. Should not be stored near motors or other electrical equipment that may generate ozone.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by licensed plumbers, HVAC technicians, or qualified industrial maintenance personnel. Depressurize and isolate the fluid circuit completely before removing the old seal. Inspect the groove and mating surfaces for wear or damage before seating the new O-ring. Apply a compatible lubricant to ease installation and avoid twisting or rolling the ring during assembly.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 2.875 inches (2-7\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 3.125 inches (3-1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 233\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Buna-N (Nitrile Butadiene Rubber)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 70 Shore A (Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Fluids\u003c\/strong\u003e: Petroleum products\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE, MIL-Spec\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 50 pieces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31401503\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCH70233\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51704343920946,"sku":"ZMSCH70233","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ced6ff15e83725c58adcf16ff18621f7.jpg?v=1788422089","url":"https:\/\/voomisupply.com\/products\/value-collection-zmsch70233-o-ring-dash-233-nbr-70","provider":"Voomi Supply","version":"1.0","type":"link"}