{"product_id":"value-collection-zmsch2x6-o-ring-6in-id-10in-od-nbr","title":"Value Collection ZMSCH2X6 O-ring 6in Id 10in Od Nbr","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCH2X6 is a round-cross-section O-ring made from Nitrile Butadiene Rubber (Buna-N), the most widely used elastomer in fluid sealing applications. With a 6-inch inside diameter, 10-inch outside diameter, and 2-inch cross-section thickness, this O-ring is sized for large-bore static or dynamic sealing tasks. It carries a Shore A hardness of 70, placing it in the hard range for improved resistance to compression set, tear, and abrasion. It performs across a working temperature range of -40 degrees F to 250 degrees F, making it suitable for a broad range of industrial and mechanical service conditions. Licensed plumbers, pipefitters, and maintenance mechanics are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is engineered for sealing applications involving petroleum-based fluids, hydraulic oils, fuels, and water. Its Buna-N compound delivers excellent resistance to petroleum products, making it a go-to choice in hydraulic systems, pump housings, valve bodies, compressors, and fluid transfer assemblies. The large 6-inch ID suits heavy industrial, commercial HVAC, and process-piping applications where standard small-bore O-rings are not appropriate. It meets SAE and MIL-Spec standards. Note: This O-ring is not FDA approved and should not be used in food-contact or potable-water service without verification of applicable regulatory requirements.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBuna-N (Nitrile Butadiene Rubber) construction provides excellent petroleum-fluid resistance\u003c\/li\u003e\n  \u003cli\u003eShore A hardness of 70 for strong compression set and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eOperating range of -40 degrees F to 250 degrees F suits wide thermal swings\u003c\/li\u003e\n  \u003cli\u003eRound cross-section profile for consistent sealing load distribution\u003c\/li\u003e\n  \u003cli\u003eMeets SAE and MIL-Spec standards for material and dimensional conformance\u003c\/li\u003e\n  \u003cli\u003eSold in packages of 100 units; minimum order quantity of 1 package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with petroleum products, hydraulic oils, fuels, and similar mineral-oil-based media. Not recommended for use with ozone, strong acids, ketones, esters, or chlorinated solvents. Do not store near direct sunlight, electric motors, or other ozone-generating equipment.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed plumbers, pipefitters, or qualified maintenance mechanics. Always depressurize and isolate the system before removing or installing O-rings. Lubricate the O-ring with a compatible fluid or assembly lubricant to prevent pinching or tearing during installation. Inspect the groove dimensions for proper fit before seating the ring; oversized or undersized grooves will compromise the seal.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nitrile Butadiene Rubber (Buna-N)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 6 inches (6.00 mm nominal supplier dimension)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 10 inches (10.00 mm nominal supplier dimension)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross-Section Thickness\u003c\/strong\u003e: 2 inches (2.00 mm nominal supplier dimension)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross-Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 70 Shore A (Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Media\u003c\/strong\u003e: Petroleum Products\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE, MIL-Spec\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100 pieces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31401503\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCH2X6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51723811094834,"sku":"ZMSCH2X6","price":15.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b2d8820497608f75d4aa74aa7b26a6d1.jpg?v=1788608335","url":"https:\/\/voomisupply.com\/products\/value-collection-zmsch2x6-o-ring-6in-id-10in-od-nbr","provider":"Voomi Supply","version":"1.0","type":"link"}