{"product_id":"value-collection-zmsch1-6x10-1-o-ring-10-1-in-id-nbr","title":"Value Collection ZMSCH1.6X10.1 O-ring 10.1 in Id Nbr","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCH1.6X10.1 is a large-diameter Buna-N (Nitrile Butadiene Rubber) o-ring designed for sealing applications in hydraulic, pneumatic, and fluid-handling systems. With a 10.1-inch inside diameter, a 13.3-inch outside diameter, and a 1.6-inch cross-section thickness, this o-ring fits large-bore fittings, valve bodies, pump housings, and manifold assemblies. The round cross-section profile provides consistent compression and reliable sealing across a wide range of static and dynamic applications. Hardness is rated at 70 Shore A, which falls in the hard range and provides good resistance to extrusion under pressure. Licensed trades including plumbers, pipefitters, and HVAC technicians regularly specify Buna-N o-rings for general-purpose sealing work.\u003c\/p\u003e\n\u003cp\u003eThis o-ring is suited for residential and commercial service environments where contact with petroleum-based fluids, oils, fuels, and hydraulic media is expected. Buna-N is the most widely used o-ring elastomer in the trades and performs reliably across a broad temperature range of -40 degrees F to 250 degrees F. Typical install scenarios include pump seals, valve stem seals, pipe flange gaskets, and equipment access covers in plumbing, HVAC, and industrial fluid systems. The part is sold in a pack of 100, making it practical for shop stock or fleet service operations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBuna-N (Nitrile Butadiene Rubber) construction with excellent resistance to petroleum products\u003c\/li\u003e\n  \u003cli\u003e70 Shore A hardness rating provides strong compression set resistance and tear and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -40 degrees F to 250 degrees F suits most HVAC and plumbing service conditions\u003c\/li\u003e\n  \u003cli\u003eRound cross-section profile ensures consistent sealing in standard o-ring grooves\u003c\/li\u003e\n  \u003cli\u003eMeets SAE and MIL-Spec standards\u003c\/li\u003e\n  \u003cli\u003ePack of 100 units supports shop inventory and multi-unit service calls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with petroleum-based fluids, oils, fuels, and hydraulic media. Not FDA approved. Should not be stored in direct sunlight or near motors or other electrical equipment that may generate ozone. Designed as an OEM-style replacement o-ring for large-bore sealing applications requiring a 10.1-inch inside diameter Buna-N seal conforming to SAE and MIL-Spec standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed plumbers, pipefitters, or HVAC technicians. Always depressurize and isolate the system before removing or installing any o-ring seal, and confirm the groove dimensions match the o-ring cross-section to prevent improper seating. Lightly lubricate the o-ring with a compatible fluid or assembly grease before installation to prevent tearing during fitment. Do not install this o-ring in systems where ozone-generating equipment or direct UV exposure is a concern, as Buna-N is susceptible to ozone degradation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Buna-N (Nitrile Butadiene Rubber)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 10.1 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 13.3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness (Cross-Section)\u003c\/strong\u003e: 1.6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross-Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 70 Shore A (Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Media\u003c\/strong\u003e: Petroleum Products\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE, MIL-Spec\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31401503\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCH1.6X10.1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51693888471346,"sku":"ZMSCH1.6X10.1","price":15.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/476ef195737e21d44ed532cc76b2e7ee.jpg?v=1788318596","url":"https:\/\/voomisupply.com\/products\/value-collection-zmsch1-6x10-1-o-ring-10-1-in-id-nbr","provider":"Voomi Supply","version":"1.0","type":"link"}