{"product_id":"value-collection-zmsch1-5x13-o-ring-13in-id-nbr","title":"Value Collection ZMSCH1.5X13 O-ring 13in Id Nbr","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCH1.5X13 is a black Nitrile Butadiene Rubber (Buna-N) O-ring with a round cross section, sized at 13 inches inside diameter, 16 inches outside diameter, and 1.5 inches thick. Buna-N is the most widely used O-ring elastomer in the trade, offering excellent resistance to petroleum-based fluids, reliable compression set performance, and strong tear and abrasion resistance. This O-ring is appropriate for a broad range of static and dynamic sealing applications in HVAC, plumbing, hydraulic, and general mechanical systems where petroleum-product compatibility is required. Licensed tradespeople and maintenance technicians install this type of seal during pump, valve, and fitting service.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is suited for residential and commercial applications involving petroleum-based fluids, oils, fuels, and hydraulic media. Its working temperature range of -40 degrees F to 250 degrees F makes it a viable choice across a wide variety of operating environments. The 70-durometer hardness rating places it in the hard category, providing good extrusion resistance in pressurized assemblies. It meets SAE and MIL-Spec standards. This part is sold in a package quantity of 100 with a minimum order quantity of 1.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBuna-N (Nitrile Butadiene Rubber) construction — the most widely used O-ring elastomer for petroleum-fluid applications\u003c\/li\u003e\n  \u003cli\u003e13 inches inside diameter, 16 inches outside diameter, 1.5 inches thickness with round cross section\u003c\/li\u003e\n  \u003cli\u003eWorking temperature range: -40 degrees F to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e70 Shore hardness (hard rating) for improved extrusion resistance under pressure\u003c\/li\u003e\n  \u003cli\u003eMeets SAE and MIL-Spec standards\u003c\/li\u003e\n  \u003cli\u003eCompatible with petroleum products including oils, fuels, and hydraulic fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with petroleum products and petroleum-based fluids. Not FDA approved; not intended for food-contact or potable-water applications. Store away from direct sunlight and electrical equipment or motors that may generate ozone to prevent premature degradation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed plumbers, HVAC technicians, or mechanical maintenance technicians. Always depressurize and isolate the system before removing or replacing O-rings. Inspect the mating groove and sealing surfaces for damage or contamination before installing the new O-ring. Avoid twisting the O-ring during installation; apply a compatible lubricant to ease seating and reduce the risk of tearing.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 13 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nitrile Butadiene Rubber (Buna-N)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 70 Shore (Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Media\u003c\/strong\u003e: Petroleum Products\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE, MIL-Spec\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31401503\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCH1.5X13\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51694148911410,"sku":"ZMSCH1.5X13","price":16.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/62ae5265214efd18baf96f2dc1a6a5ff.jpg?v=1788320892","url":"https:\/\/voomisupply.com\/products\/value-collection-zmsch1-5x13-o-ring-13in-id-nbr","provider":"Voomi Supply","version":"1.0","type":"link"}