{"product_id":"value-collection-zmscfs018-fluorosilicone-o-ring-dash-018","title":"Value Collection ZMSCFS018 Fluorosilicone O-ring Dash 018","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION ZMSCFS018 is a fluorosilicone O-ring with a round cross section, designed for static and dynamic sealing applications where wide temperature range and fuel resistance are required. It measures 0.739 inches inside diameter, 0.875 inches outside diameter, and 0.0625 inches thick. The blue fluorosilicone compound carries a Shore A hardness of 70, making it rated hard. This part is sold in a pack of 5 and is commonly installed by HVAC technicians, aerospace mechanics, and fluid system technicians working on fuel lines, hydraulic systems, and lubricant circuits.\u003c\/p\u003e\u003cp\u003eFluorosilicone O-rings fill a specific role where standard silicone lacks fuel resistance and standard nitrile lacks the low-temperature flexibility needed. This Dash 018 O-ring is suited for aerospace fuel systems, diester-based lubricant circuits, and petroleum oil systems that cycle between extreme cold and sustained heat. It is also used in ground support equipment, industrial fuel handling systems, and HVAC refrigerant service applications where fluorosilicone compatibility is specified. Note that due to limited tensile strength and abrasion resistance, it is not recommended for high-dynamic-load or abrasive-media applications.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFluorosilicone compound rated for -80 degrees F to 400 degrees F continuous service\u003c\/li\u003e\n\u003cli\u003eDash 018 size: 0.739 inches ID x 0.875 inches OD x 0.0625 inches thick\u003c\/li\u003e\n\u003cli\u003eRound cross section for consistent sealing geometry in standard O-ring grooves\u003c\/li\u003e\n\u003cli\u003eShore A hardness of 70 for firm compression set resistance\u003c\/li\u003e\n\u003cli\u003eCompliant with MIL-R-25988 Type 1 Class 1 specification\u003c\/li\u003e\n\u003cli\u003eCompatible with petroleum oils, fuels, and diester-base lubricants up to 350 degrees F\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with petroleum products, petroleum oils, fuels, and diester-base lubricants. Meets MIL-R-25988 TY 1 CL 1 requirements, making it suitable for aerospace fuel system and military-spec fluid circuit applications where fluorosilicone seals are called out.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified technician familiar with O-ring sealing systems and the applicable fluid system codes. Always depressurize and de-energize the system before removing or replacing seals. Inspect the O-ring groove for burrs, corrosion, or contamination prior to installation, and apply a compatible lubricant to ease seating without distorting the cross section. Do not stretch the O-ring excessively during installation, as fluorosilicone has lower tensile strength than nitrile or EPDM compounds.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Fluorosilicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 018\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.739 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.0625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A Hardness\u003c\/strong\u003e: 70 (Hard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -80 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Media\u003c\/strong\u003e: Petroleum products, petroleum oils, fuels, diester-base lubricants\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e: MIL-R-25988 TY 1 CL 1 Compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.207 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCFS018\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51709908844850,"sku":"ZMSCFS018","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d07c30dd8efcd500b8bb1759bdfbae86_c9656020-6e78-4b62-becf-36c86d716842.jpg?v=1788462146","url":"https:\/\/voomisupply.com\/products\/value-collection-zmscfs018-fluorosilicone-o-ring-dash-018","provider":"Voomi Supply","version":"1.0","type":"link"}