{"product_id":"value-collection-zmsce70206-epdm-o-ring-dash-206-pack-100","title":"Value Collection ZMSCE70206 Epdm O-ring Dash 206 Pack 100","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZMSCE70206 is a Dash 206 EPDM O-ring designed for sealing applications in fluid and hydraulic systems. The ring measures 0.5 inches inside diameter, 0.75 inches outside diameter, and 0.125 inches thick, with a round cross section and a Shore A hardness rating of 70. EPDM (Ethylene Propylene Diene Monomer) provides strong resistance to heat, steam, and phosphate ester hydraulic fluids, making this O-ring a practical choice for demanding service environments. Each order contains 100 rings. Licensed plumbers, pipefitters, HVAC technicians, and hydraulic system mechanics are the typical installers of this component.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is well suited for residential and commercial hot water systems, steam service lines, and hydraulic systems using phosphate ester fluids such as Skydrol used in commercial aircraft hydraulic circuits. It is also recommended for general-purpose sealing where EPDM compatibility is required. The 70 hardness rating provides firm compression without excessive deformation under standard clamping loads. Sold in packs of 100, making it practical for shop stock or service van inventory.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eEPDM material rated for service from -65 degrees F to 300 degrees F\u003c\/li\u003e\n  \u003cli\u003eExcellent resistance to Skydrol fluids used in commercial aircraft hydraulic systems\u003c\/li\u003e\n  \u003cli\u003eSuitable for hot water and steam service applications\u003c\/li\u003e\n  \u003cli\u003eCompatible with phosphate ester type hydraulic fluids\u003c\/li\u003e\n  \u003cli\u003eRound cross section, Dash 206 standard sizing\u003c\/li\u003e\n  \u003cli\u003eShore A hardness of 70 for firm, reliable sealing compression\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for sealing applications involving hot water, steam, and phosphate ester hydraulic fluids. Compatible material types listed by the manufacturer include hot water, steam, and phosphate ester fluids. Not FDA approved; not intended for food-contact applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall by licensed plumbers, pipefitters, or qualified hydraulic system technicians following applicable local codes and system manufacturer requirements. Always depressurize and drain the system, and allow it to cool before replacing O-rings. Inspect the groove and mating surfaces for damage or debris before seating the new ring. Do not use petroleum-based lubricants with EPDM material; use a compatible assembly lubricant only.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: EPDM (Ethylene Propylene Diene Monomer)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 206\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 70 Shore A (Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -65 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 300 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31401503\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZMSCE70206\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51692621922610,"sku":"ZMSCE70206","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d07c30dd8efcd500b8bb1759bdfbae86_94e9c886-248d-4d03-8321-3297164570ff.jpg?v=1788300131","url":"https:\/\/voomisupply.com\/products\/value-collection-zmsce70206-epdm-o-ring-dash-206-pack-100","provider":"Voomi Supply","version":"1.0","type":"link"}