{"product_id":"value-collection-zbd9500-223-viton-o-ring-dash-223","title":"Value Collection ZBD9500-223 Viton O-ring Dash 223","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ZBD9500-223 is a Viton O-ring sized to Dash 223 with a 1.625-inch inside diameter, 1.875-inch outside diameter, and a 0.125-inch cross-section thickness. Viton (fluoroelastomer) compound delivers strong resistance to fuels, oils, hydraulic fluids, and a wide range of industrial chemicals. A durometer hardness rating of 75 places this ring in the hard category, which limits extrusion under pressure and helps maintain a reliable seal in demanding service conditions. The rated temperature range runs from -15 degrees F to 400 degrees F. Plumbers, HVAC technicians, and industrial mechanics install this type of seal across fluid and gas handling systems.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is suited for static and dynamic sealing applications where exposure to petroleum-based fluids, solvents, or elevated temperatures would degrade standard Buna-N or EPDM seals. Typical installation points include valve stems, pump housings, fittings, and hydraulic cylinder end caps in both residential and light commercial systems. The round cross-section mates with standard Dash 223 O-ring grooves, making it a direct dimensional fit wherever that dash size is called out on an engineering drawing or parts list.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eViton (fluoroelastomer) material for superior resistance to fuels, oils, and chemicals\u003c\/li\u003e\n  \u003cli\u003eTemperature range of -15 degrees F to 400 degrees F for high-heat and low-temp service\u003c\/li\u003e\n  \u003cli\u003eDurometer hardness of 75 (Hard) to resist extrusion under pressure\u003c\/li\u003e\n  \u003cli\u003eDash 223 sizing with 1.625-inch ID and 1.875-inch OD for groove-specific fitment\u003c\/li\u003e\n  \u003cli\u003eRound cross-section profile for consistent sealing contact across the groove seat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement for any application requiring a Dash 223 O-ring with Viton compound, including valve assemblies, pump housings, and hydraulic fittings that specify this dash size and material.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eShut off fluid supply and relieve system pressure before removing or installing O-rings. Lubricate the ring lightly with a compatible grease or fluid before seating to reduce the risk of tearing during installation. Inspect the mating groove for burrs, scoring, or debris that could damage the seal surface. Installation should be performed by a qualified technician following applicable equipment service procedures.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Viton (Fluoroelastomer)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 223\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 1.625 inches (40.87 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1.875 inches (47.93 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.125 inches (3.53 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurometer Hardness\u003c\/strong\u003e: 75 (Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -15 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31401503\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ZBD9500-223\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51693255295282,"sku":"ZBD9500-223","price":32.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/87f3b1392436348ca98dbe7821fcbdbc.jpg?v=1788309728","url":"https:\/\/voomisupply.com\/products\/value-collection-zbd9500-223-viton-o-ring-dash-223","provider":"Voomi Supply","version":"1.0","type":"link"}