{"product_id":"value-collection-ws-pl-0487005-cartridge-filter-5-micron","title":"Value Collection WS-PL-0487005 Cartridge Filter 5 Micron","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION WS-PL-0487005 is a melt-blown, thermally bonded polypropylene cartridge filter designed for point-of-entry and point-of-use plumbing filtration systems. Rated at 5 microns, it captures fine sediment particles from supply water before they reach downstream fixtures, valves, and equipment. The filter measures 2.5 inches OD and 4.875 inches in length, with a maximum working pressure of 60 psi and a maximum flow rate of 2.00 gallons per minute. Both the filter media and core are constructed from polypropylene, making it compatible with a wide range of potable and non-potable water applications. Licensed plumbers and water treatment technicians are the primary installers.\u003c\/p\u003e\u003cp\u003eThis cartridge is suited for residential and light commercial plumbing filtration housings where sediment control is required. Typical installations include whole-house pre-filters, under-sink systems, and inline protection for water heaters, irrigation controls, and appliance supply lines. The 5-micron rating targets fine sand, rust, scale, and particulate matter. With a maximum operating temperature of 176 degrees F, it is appropriate for both cold and hot water supply lines within that thermal range. Its compact 4.875-inch length fits standard short-body filter housings commonly found in residential plumbing systems.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5-micron polypropylene melt-blown media for sediment reduction\u003c\/li\u003e\n\u003cli\u003e2.5 inches OD x 4.875 inches long — fits standard short-body filter housings\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure of 60 psi\u003c\/li\u003e\n\u003cli\u003eMaximum flow rate of 2.00 gallons per minute\u003c\/li\u003e\n\u003cli\u003eMaximum operating temperature of 176 degrees F\u003c\/li\u003e\n\u003cli\u003ePolypropylene core and media construction for broad chemical compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement for standard short-body plumbing cartridge filter housings that accept a 2.5-inch OD, 4.875-inch long cartridge element.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a licensed plumber or qualified water treatment technician. Shut off the supply water and relieve system pressure before opening the filter housing. Inspect the housing O-ring and replace it if worn before reinstalling the housing cap. Follow local plumbing codes, including applicable IPC requirements, for any potable water filtration installation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Style\u003c\/strong\u003e: Melt Blown, Thermally Bonded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicron Rating\u003c\/strong\u003e: 5 microns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 2.5 inches (2.4800 inches decimal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 4-7\/8 inches (4.8700 inches decimal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pressure\u003c\/strong\u003e: 60 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate\u003c\/strong\u003e: 2.00 gallons per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Temperature\u003c\/strong\u003e: 176 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedia Material\u003c\/strong\u003e: Polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Material\u003c\/strong\u003e: Polypropylene Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces\u003c\/strong\u003e: Sediment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.17 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 40161500\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: WS-PL-0487005\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51689029730610,"sku":"WS-PL-0487005","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f8ddca9bf9279706212330381ab312ab.jpg?v=1788254077","url":"https:\/\/voomisupply.com\/products\/value-collection-ws-pl-0487005-cartridge-filter-5-micron","provider":"Voomi Supply","version":"1.0","type":"link"}