{"product_id":"value-collection-tev80119-o-ring-dash-119-ptfe-viton","title":"Value Collection TEV80119 O-ring Dash 119 Ptfe Viton","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION TEV80119 is a Dash 119 O-ring constructed with a polytetrafluoroethylene (PTFE) FEP encapsulation over a Viton or silicone elastomer core. The encapsulation is seamless and uniform, fully enclosing the core material to combine the chemical and temperature resistance of solid PTFE with the elasticity and recovery properties of the elastomer beneath. With an inside diameter of 0.924 inches, an outside diameter of 1.125 inches, and a cross-section thickness of 0.0937 inches, this round-cross-section ring is suited for static and dynamic sealing applications in demanding fluid and chemical environments. A hardness rating of 80 Shore A classifies it in the hard range. Licensed plumbers, HVAC technicians, and industrial maintenance technicians typically specify this type of seal where standard rubber O-rings would degrade from chemical exposure.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is used in systems where aggressive chemicals, high temperatures, or stringent cleanliness requirements rule out standard elastomer seals. The temperature range of -75 degrees F to 400 degrees F makes it appropriate for both cryogenic-adjacent and high-heat service. Typical installation scenarios include pump seals, valve stems, fittings, and fluid handling connections in plumbing, HVAC, chemical processing, and industrial maintenance applications. It is sold individually, with a minimum order quantity of one unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSeamless PTFE FEP encapsulation fully encloses a Viton or silicone elastomer core for dual-material performance\u003c\/li\u003e\n  \u003cli\u003eMatches the chemical resistance of solid PTFE O-rings while retaining elastomer recovery and sealing force\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -75 degrees F to 400 degrees F suits a wide range of service conditions\u003c\/li\u003e\n  \u003cli\u003eRound cross-section profile fits standard Dash 119 groove dimensions\u003c\/li\u003e\n  \u003cli\u003e80 Shore A hardness rating provides firm compression resistance suitable for high-pressure sealing environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard Dash 119 O-ring replacement for any groove or fitting machined to Dash 119 dimensions, including applications requiring PTFE-encapsulated or FEP-encapsulated seals in chemical, plumbing, or HVAC fluid systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eShut down system pressure and drain or isolate the fluid circuit before removing the old seal. Inspect the groove for nicks, corrosion, or debris that could compromise the new seal surface. Do not use petroleum-based lubricants on PTFE-encapsulated O-rings; consult the system manufacturer for approved assembly lubricants compatible with PTFE. Installation should be performed by a licensed technician familiar with the applicable system type and relevant codes such as IPC or IFGC where gas or pressurized fluid systems are involved.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.924 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.0937 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDash Number\u003c\/strong\u003e: 119\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCross Section Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: PTFE FEP-Encapsulated Viton or Silicone Elastomer Core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 80 Shore A (Hard)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -75 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TEV80119\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51696427368754,"sku":"TEV80119","price":17.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/792989f58b47d995e8f20d92a317784f_c564799d-6669-45c1-a6ba-d066ff150ecb.jpg?v=1788342563","url":"https:\/\/voomisupply.com\/products\/value-collection-tev80119-o-ring-dash-119-ptfe-viton","provider":"Voomi Supply","version":"1.0","type":"link"}