{"product_id":"value-collection-st0640156-bridge-reamer-1-7-8-in-hss","title":"Value Collection ST0640156 Bridge Reamer 1-7\/8 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ST0640156 is a bridge reamer designed to enlarge and align drilled or punched holes in structural steel, plate, and fabricated assemblies. Built from high-speed steel with a bright, uncoated finish, it measures 1.875 inches in diameter with a 7-3\/8 inch flute length and a 13 inch overall length. The 4MT Morse taper shank seats into a compatible taper socket on a drill press, magnetic drill, or reaming machine, transmitting torque without slippage. With five straight flutes and a right-hand cut, it produces a clean, dimensionally accurate hole suited to pin, bolt, and rivet fitment in heavy fabrication work.\u003c\/p\u003e\n\u003cp\u003eThis bridge reamer is used in structural steel erection, bridge construction, heavy equipment fabrication, and ironwork where bolt holes must be brought into precise alignment before fastener installation. The 1-1\/4 inch small end diameter and straight flute geometry allow the tool to enter a slightly undersized or misaligned hole and progressively guide itself to full diameter. Ironworkers, boilermakers, and structural fabricators typically use this reamer when hole alignment across multiple members requires correction prior to bolting.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1.875 inch reamer diameter with a 1-1\/4 inch small end for guided entry into undersized holes\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction provides durability and wear resistance on structural steel workpieces\u003c\/li\u003e\n  \u003cli\u003e4MT Morse taper shank for secure, repeatable seating in drill presses and magnetic drills\u003c\/li\u003e\n  \u003cli\u003eFive straight flutes with right-hand cut for smooth stock removal and accurate hole sizing\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suitable for use with cutting fluid to extend tool life\u003c\/li\u003e\n  \u003cli\u003e13 inch overall length provides reach in deep or stacked-plate applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with drill presses, magnetic drills, and reaming machines equipped with a No. 4 Morse taper socket. Suitable for enlarging and aligning holes in structural steel, plate steel, and fabricated assemblies where bolt or pin fitment is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tool is installed and operated by ironworkers, boilermakers, or structural fabricators using equipment rated for the tool diameter and material. Secure the Morse taper shank fully into the machine spindle socket before operation, and verify the drawbar or drift-key retention is engaged to prevent ejection under load. Always apply a suitable cutting fluid to the flutes during reaming to reduce heat buildup and extend tool life. Wear appropriate PPE including eye protection and cut-resistant gloves when handling or changing the reamer.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Type\u003c\/strong\u003e: Bridge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 1-7\/8 inches (1.8750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmall End Diameter\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 7-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 13 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Morse Taper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Taper Designation\u003c\/strong\u003e: 4MT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.12 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ST0640156\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51699090817330,"sku":"ST0640156","price":531.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0e51c0e6d844aad0656ae479e29f764e.jpg?v=1788372183","url":"https:\/\/voomisupply.com\/products\/value-collection-st0640156-bridge-reamer-1-7-8-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}