{"product_id":"value-collection-st0220048-chucking-reamer-3-4-in-hss-2mt","title":"Value Collection ST0220048 Chucking Reamer 3\/4 in Hss 2MT","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION ST0220048 is a high-speed steel (HSS) chucking reamer designed for precision hole finishing in metalworking applications. It carries a 3\/4 inch (0.7500 inch decimal) cutting diameter and an overall length of 9-1\/2 inches, with a 2-1\/2 inch spiral flute length. The 8-flute geometry and left-hand spiral flute design promote smooth chip evacuation while the right-hand cutting direction delivers consistent, accurate bore sizing. The bright, uncoated finish is suitable for general-purpose ferrous and non-ferrous stock removal where reaming tolerances are critical. Machinists and tool-room technicians install this reamer in drill presses, lathes, and machining centers equipped with a No. 2 Morse Taper (2MT) spindle or adapter.\u003c\/p\u003e\n\u003cp\u003eThis chucking reamer is intended for machine-driven reaming operations where a Morse taper drive is available. Typical applications include finish-reaming drilled or bored holes to close dimensional tolerances in job shops, production machining cells, and maintenance repair operations. It is not configured as a dowel pin reamer or an over\/under size reamer, making it a straightforward standard-diameter tool for direct hole finishing to the 3\/4 inch nominal size.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4 inch (0.7500 inch) cutting diameter for standard nominal hole sizing\u003c\/li\u003e\n  \u003cli\u003e8-flute configuration provides fine surface finish and even cutting load distribution\u003c\/li\u003e\n  \u003cli\u003eLeft-hand spiral flutes push chips forward and reduce chatter during machine reaming\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction compatible with standard spindle rotation\u003c\/li\u003e\n  \u003cli\u003eNo. 2 Morse Taper (2MT) shank seats directly in matching machine spindles or taper-shank adapters\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated HSS construction suitable for use with cutting fluid on a wide range of workpiece materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in machine spindles, drill presses, lathes, and machining centers fitted with a No. 2 Morse Taper (2MT) socket or adapter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eMachine reaming requires a licensed machinist or qualified tool-room technician operating the equipment per established shop safety protocols. Power down and lock out the machine before seating or removing the Morse taper shank. Ensure the taper socket is clean and free of chips or burrs before inserting the shank to achieve full taper contact. Always apply an appropriate cutting fluid for the workpiece material to protect the cutting edges and maintain dimensional accuracy.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 9-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Morse Taper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Taper Designation\u003c\/strong\u003e: 2MT (No. 2 Morse Taper)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDowel Pin Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOver\/Under Size Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ST0220048\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51717337186610,"sku":"ST0220048","price":76.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3b20b50b716c11c6ed9608648f7cd2bc.jpg?v=1788538730","url":"https:\/\/voomisupply.com\/products\/value-collection-st0220048-chucking-reamer-3-4-in-hss-2mt","provider":"Voomi Supply","version":"1.0","type":"link"}