{"product_id":"value-collection-sm0500700-chucking-reamer-7-00mm-hss","title":"Value Collection SM0500700 Chucking Reamer 7.00mm Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION SM0500700 is a straight-flute chucking reamer designed to bring bored or drilled holes to a precise finished diameter of 7.00mm (0.2756 inches). Manufactured from high-speed steel (HSS) with a bright, uncoated finish, it delivers clean, accurate results in a wide range of common shop materials. The straight-cylindrical shank seats securely in standard drill chucks or collet holders, making setup straightforward. With 4 right-hand cutting flutes and a 1-1\/2 inch flute length, the tool removes minimal stock while producing smooth, consistent hole walls. Machinists and toolroom technicians use this reamer as a reliable finishing tool in both manual and CNC drilling operations.\u003c\/p\u003e\n\u003cp\u003eThis reamer is suited for finishing through-holes and blind bores in ferrous and non-ferrous workpieces where tight diameter tolerances are required. At 6 inches overall length, it provides adequate reach for typical machine shop fixtures and vise setups. The right-hand cutting direction works with standard spindle rotation. It is intended for use in drill presses, lathes, and machining centers equipped with a compatible chuck or collet. This tool is not configured as a dowel-pin reamer or as an over\/under-size reamer, so it is appropriate for standard nominal-diameter finishing applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e7.00mm (0.2756 inch) finished hole diameter for precise tolerance work\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel (HSS) construction provides durability across a range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003e4 straight flutes with right-hand cutting direction for smooth, consistent finish\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish — ready to use without additional prep\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank compatible with standard drill chucks and collet holders\u003c\/li\u003e\n  \u003cli\u003e6 inch overall length with 1-1\/2 inch flute length for typical machine shop applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard-tolerance chucking reamer for use in drill presses, lathes, and machining centers that accept a straight-cylindrical shank via chuck or collet. No specific OEM machine compatibility was stated by the manufacturer for this item.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eChucking reamers are installed by machinists using a drill chuck or collet that matches the shank diameter — confirm shank fit before mounting. Always power down and lock out the machine spindle before changing tooling. Reamers are a finishing tool and require a pre-drilled or bored hole that is already close to final diameter; attempting to remove excess stock risks tool breakage and poor surface finish. Use appropriate cutting fluid for the workpiece material to extend tool life and improve hole quality.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 7.00mm (0.2756 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDowel Pin Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOver\/Under Size Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SM0500700\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51699121357106,"sku":"SM0500700","price":22.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f12c62a7d1b6f922e25a79aee5e8d2fc.jpg?v=1788372454","url":"https:\/\/voomisupply.com\/products\/value-collection-sm0500700-chucking-reamer-7-00mm-hss","provider":"Voomi Supply","version":"1.0","type":"link"}