{"product_id":"value-collection-sc2060200-countersink-60-degree-6-flute","title":"Value Collection SC2060200 Countersink 60 Degree 6 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION SC2060200 is a single-end, 6-flute countersink designed for right-hand cutting in a wide range of metalworking and fabrication applications. Built from high-speed steel with a bright, uncoated finish, it features a 60-degree included angle and a 1-inch straight cylindrical shank. The 2-inch head diameter and 2.125-inch shank length make it suited for bench-top drill press work and CNC setups alike. No pilot is included, and the tool does not countersink head only — it operates as a full countersink. Machinists, tool-and-die workers, and general fabricators will find this tool appropriate for deburring, chamfering, and countersink seat preparation in mild steel, aluminum, and similar materials.\u003c\/p\u003e\n\u003cp\u003eThis countersink is used in machine shops, fabrication facilities, and maintenance departments where consistent, clean countersink geometry is required. The 60-degree included angle is common in aerospace-style fastener applications and general metalwork where a shallower seat angle is specified. The straight cylindrical shank seats directly into standard drill chucks or collet systems without adapters. It is appropriate for both manual and machine-feed drilling operations where a controlled, repeatable countersink depth is needed.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e60-degree included angle with a 30-degree centerline angle for precise fastener seat geometry\u003c\/li\u003e\n  \u003cli\u003e6-flute design reduces chatter and produces a smoother finish on the countersink seat\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction provides durability across mild steel, aluminum, and similar materials\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish — no coating buildup to affect dimensional accuracy\u003c\/li\u003e\n  \u003cli\u003e1-inch straight cylindrical shank fits standard drill chucks and collet holders without adapters\u003c\/li\u003e\n  \u003cli\u003eSingle-end tool with no pilot — compatible with pre-drilled or punched holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard drill chucks and collet systems that accept a 1-inch straight cylindrical shank. Suitable for countersinking operations on mild steel, aluminum, and similar workpiece materials where a 60-degree seat angle is specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or toolroom personnel familiar with cutting tool setup and safe machine operation. Secure the shank fully in the chuck or collet before powering the machine, and confirm the workpiece is firmly clamped. Use appropriate cutting fluid for the workpiece material to extend tool life and improve surface finish. Inspect the cutting edges for wear or chipping before each use and replace the tool if damage is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 2.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes Pilot\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright, Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Countersinking\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SC2060200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51714375221554,"sku":"SC2060200","price":178.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f3b46a30a61f355323b123c5bb42a019.jpg?v=1788500506","url":"https:\/\/voomisupply.com\/products\/value-collection-sc2060200-countersink-60-degree-6-flute","provider":"Voomi Supply","version":"1.0","type":"link"}