{"product_id":"value-collection-plmsc12935-flap-disc-80-grit-type-27-4-5-in","title":"Value Collection PLMSC12935 Flap Disc 80 Grit Type 27 4.5 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION PLMSC12935 is a Type 27 flap disc designed for grinding and blending on metal surfaces. Built with zirconia alumina abrasive on a poly-cotton backing, it delivers consistent stock removal and a smooth finish in one pass. The disc measures 4.5 inches in diameter and mounts via a 5\/8-11 threaded arbor hole, fitting standard right-angle grinders used across fabrication, welding, and maintenance applications. At 80 grit, it falls in the medium grade range, suited for moderate material removal without excessive surface damage. High-density flap construction extends disc life and maintains cutting performance through the full wear cycle.\u003c\/p\u003e\n\u003cp\u003eThis flap disc is intended for use on steels and stainless steel in both residential and commercial settings. Typical applications include weld blending, scale removal, edge chamfering, and surface preparation prior to coating or inspection. It is commonly used by metal fabricators, welders, pipefitters, and maintenance technicians working with angle grinders on structural steel, tube, plate, and pipe. The Type 27 depressed-center profile provides a low grinding angle well suited to flat and contoured surface work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eZirconia alumina abrasive for aggressive cutting on steel and stainless steel\u003c\/li\u003e\n  \u003cli\u003e80 grit medium grade for balanced material removal and surface finish\u003c\/li\u003e\n  \u003cli\u003eType 27 depressed-center profile for flat and near-flat surface grinding\u003c\/li\u003e\n  \u003cli\u003e5\/8-11 threaded arbor hole fits standard angle grinders\u003c\/li\u003e\n  \u003cli\u003eHigh-density poly-cotton backing extends disc service life\u003c\/li\u003e\n  \u003cli\u003eRated for steels and stainless steel applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement for standard 4.5-inch Type 27 flap discs with a 5\/8-11 threaded arbor attachment, compatible with right-angle grinders accepting that arbor size and disc diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and disc changes should be performed by qualified personnel following grinder manufacturer guidelines and applicable ANSI B7.1 safety standards for abrasive wheels. Always power down and disconnect the grinder from its power source before mounting or removing a disc. Inspect the disc for cracks or damage before each use and never exceed the maximum RPM rating marked on the disc or grinder. Wear appropriate PPE including eye protection and a face shield when operating abrasive grinding equipment.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDisc Diameter\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Hole Thread Size\u003c\/strong\u003e: 5\/8-11\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlap Disc Type\u003c\/strong\u003e: Type 27\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrit\u003c\/strong\u003e: 80\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: Medium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAbrasive Material\u003c\/strong\u003e: Zirconia Alumina\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAbrasive Type\u003c\/strong\u003e: Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Poly-Cotton\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAttachment Type\u003c\/strong\u003e: Threaded Arbor Hole\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDisc Color\u003c\/strong\u003e: Blue\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Steels, Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e: High Density\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PLMSC12935\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51691312480562,"sku":"PLMSC12935","price":166.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c6de9fd94a85f8abdf0bd1cbc4e502c6.jpg?v=1788283102","url":"https:\/\/voomisupply.com\/products\/value-collection-plmsc12935-flap-disc-80-grit-type-27-4-5-in","provider":"Voomi Supply","version":"1.0","type":"link"}