{"product_id":"value-collection-mdb241-50x15-hex-bushing-2x1-2-in-class-150","title":"Value Collection MDB241 50X15 Hex Bushing 2x1\/2 in Class 150","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION MDB241 50X15 is a Class 150 malleable iron hex bushing designed to reduce a 2-inch threaded pipe connection down to a 1\/2-inch threaded port. Hex bushings are standard reducing fittings used throughout gas, water, and compressed-air piping systems where a concentric thread reduction is needed without adding pipe length. This fitting is rated to 150 psi and connects via threaded ends on both the male and female sides. The malleable iron construction with a black finish provides the durability required for industrial and commercial pipe runs. Licensed plumbers and pipefitters install this type of fitting during new construction and retrofit work.\u003c\/p\u003e\n\u003cp\u003eThis hex bushing is suited for residential and commercial plumbing, HVAC hydronic piping, gas distribution piping, and general industrial pipe systems where a 2-inch to 1\/2-inch threaded reduction is required. The threaded connection style makes it compatible with standard NPT-threaded pipe and fittings of the same class. It is appropriate for use in low-pressure gas lines, water supply systems, and compressed-air distribution where malleable iron fittings are specified.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eClass 150 pressure rating at 150 psi working pressure\u003c\/li\u003e\n  \u003cli\u003e2-inch female NPT to 1\/2-inch male NPT threaded reduction\u003c\/li\u003e\n  \u003cli\u003eMalleable iron construction for strength and vibration resistance\u003c\/li\u003e\n  \u003cli\u003eBlack finish suitable for gas and general-purpose pipe systems\u003c\/li\u003e\n  \u003cli\u003eMeets EN 10242, FM Approved, GB\/T 3287, GB\/T 7306.2, ISO 7\/1, and cULus Listed standards\u003c\/li\u003e\n  \u003cli\u003eHex-body profile allows standard wrench installation without marring pipe threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-install fitting for Class 150 malleable iron threaded pipe systems using standard NPT thread forms.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or pipefitter in accordance with applicable codes such as the IPC or IFGC. Shut off and depressurize the pipe system fully before removing or installing any threaded fittings. Apply an approved thread sealant or PTFE tape to the male threads before assembly, and tighten with a pipe wrench on the hex body. Do not over-tighten or use the fitting body as a lever point, as malleable iron can crack under excessive bending stress.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Hex Bushing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Size\u003c\/strong\u003e: 2 x 1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 150 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Malleable Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: EN 10242, FM Approved, GB\/T 3287, GB\/T 7306.2, ISO 7\/1, cULus Listed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MDB241 50X15\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51723774263602,"sku":"MDB241 50X15","price":18.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e750cbe192620e9017fe2809eec4ee81_f572c8e4-bd6e-4ce6-afe9-83772212c9f2.jpg?v=1788607874","url":"https:\/\/voomisupply.com\/products\/value-collection-mdb241-50x15-hex-bushing-2x1-2-in-class-150","provider":"Voomi Supply","version":"1.0","type":"link"}