{"product_id":"value-collection-kpl-233-knurl-wheel-3-4-in-33-tpi-diagonal-hss","title":"Value Collection KPL-233 Knurl Wheel 3\/4 in 33 Tpi Diagonal Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION KPL-233 is a standard knurl wheel designed for form knurling operations on metal lathes and knurling tool holders. It produces a left-hand diagonal knurl pattern using a 90-degree included tooth angle and 33 TPI circular pitch, leaving a consistent, repeatable texture on turned workpieces. The wheel is machined from high speed steel with a bright finish and measures 3\/4 inch in diameter with a 3\/8 inch face width and a 1\/4 inch hole diameter. It is used by machinists and toolmakers in production and job-shop turning applications where a diagonal grip pattern is required.\u003c\/p\u003e\n\u003cp\u003eThe KPL-233 fits standard KP-series knurl wheel holders and is suited for residential shop, production floor, and tool room use. The left-hand diagonal tooth pattern at a 30-degree helix angle is commonly specified when a single-wheel diagonal knurl is needed without a crosshatch effect. This wheel is appropriate for applications on steel, aluminum, brass, and similar machinable metals. It installs as a replacement or additional wheel in any knurling tool holder designed to accept KP-series wheels with a 1\/4 inch bore and standard 3\/4 inch wheel diameter.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLeft-hand diagonal tooth pattern with 30-degree helix angle for consistent single-direction knurling\u003c\/li\u003e\n  \u003cli\u003e90-degree included tooth angle at 33 TPI circular pitch for defined, uniform tooth geometry\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with bright finish for durability across extended production runs\u003c\/li\u003e\n  \u003cli\u003e3\/4 inch diameter and 3\/8 inch face width sized for standard KP-series tool holders\u003c\/li\u003e\n  \u003cli\u003e1\/4 inch bore accommodates standard knurl holder arbor pins and axles\u003c\/li\u003e\n  \u003cli\u003eForm-type knurling displaces material rather than cutting, preserving part diameter accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard replacement or supplemental knurl wheel for KP-series knurling tool holders accepting a 3\/4 inch diameter, 1\/4 inch bore wheel.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eKnurl wheels are installed and serviced by machinists operating metal lathes or CNC turning centers. Before changing or inspecting a knurl wheel, power down and lock out the machine per standard OSHA lockout\/tagout procedures. Ensure the wheel spins freely on its arbor pin with no lateral play before engaging the workpiece. Do not exceed the feed rate or depth-of-knurl recommendations of the tool holder manufacturer, as overloading a form knurl wheel can cause premature tooth wear or wheel fracture.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKnurl Shape\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Pattern\u003c\/strong\u003e: Diagonal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePattern Direction\u003c\/strong\u003e: Left-Hand Diagonal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eForm or Cut Type\u003c\/strong\u003e: Form\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Bright\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKnurl Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch System\u003c\/strong\u003e: Circular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch (TPI)\u003c\/strong\u003e: 33\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Tooth Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eKnurl Series\u003c\/strong\u003e: KP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.075 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: KPL-233\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":68388747444530,"sku":"KPL-233","price":36.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/50a56b7a571e589bc81b655f3998aff2.jpg?v=1793904774","url":"https:\/\/voomisupply.com\/products\/value-collection-kpl-233-knurl-wheel-3-4-in-33-tpi-diagonal-hss","provider":"Voomi Supply","version":"1.0","type":"link"}