{"product_id":"value-collection-icp-26410e-snmg432-turning-insert-carbide","title":"Value Collection ICP-26410E SNMG432 Turning Insert Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION ICP-26410E is a solid carbide turning insert designed for precision metal cutting operations on CNC lathes and manual turning centers. It carries the ANSI insert code SNMG432 and ISO insert code SNMG120408, with a 90-degree square shape and a negative side clearance angle. The insert is coated with aluminum oxide (Al2O3), grade ICP22, which provides thermal resistance and wear protection during interrupted and continuous turning cuts. With a 0.5-inch inscribed circle and a 3\/16-inch thickness, it is suited to medium-duty turning applications where dimensional stability and edge retention are priorities. Installation is performed by machinists and toolroom technicians using compatible SNMG-style toolholders with clamp and pin holding systems.\u003c\/p\u003e\u003cp\u003eThis insert is applied in turning operations targeting workpiece material groups K (cast iron) and N (non-ferrous metals such as aluminum, copper, and brass alloys), as classified under ISO primary workpiece material codes. It is appropriate for finishing and semi-finishing passes where a 1\/32-inch corner radius delivers a balance between surface finish quality and edge strength. The G-style chip breaker geometry assists in chip control during these operations. It is sold individually but requires a minimum order quantity of 10 units per order.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eANSI code SNMG432 with ISO equivalent SNMG120408 for broad toolholder compatibility\u003c\/li\u003e\n\u003cli\u003eAl2O3 (aluminum oxide) coating, grade ICP22, for thermal and wear resistance\u003c\/li\u003e\n\u003cli\u003e90-degree square insert shape with negative side clearance for strong cutting edge geometry\u003c\/li\u003e\n\u003cli\u003e1\/32-inch corner radius for semi-finish and finish turning surface quality\u003c\/li\u003e\n\u003cli\u003eG-style chip breaker for controlled chip formation in K and N material groups\u003c\/li\u003e\n\u003cli\u003eClamp and pin holding method compatible with standard SNMG toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in SNMG-style turning toolholders that accept a 432 size insert with clamp and pin holding. Suitable for machining ISO material groups K (cast iron) and N (non-ferrous metals) as indicated by the primary workpiece material codes in the insert specification.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eTurning insert replacement should be performed by a qualified machinist with the machine spindle fully stopped and all motion axes locked out per facility lockout\/tagout procedures. Use the appropriate torx or hex key to release the clamp screw before removing the worn insert. Seat the new insert fully and evenly in the toolholder pocket before re-engaging the clamp and pin. Verify insert seating and tool offset compensation before resuming cutting operations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI Insert Code\u003c\/strong\u003e: SNMG432\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Insert Code\u003c\/strong\u003e: SNMG120408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: S - Square, 90 degrees included angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: ICP22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Al2O3 (Aluminum Oxide)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5 inches (12.70 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1875 inches (3\/16 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0312 inches (1\/32 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2030 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide Clearance\u003c\/strong\u003e: Negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: N\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: K (Cast Iron), N (Non-Ferrous)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0009 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ICP-26410E\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51709924114738,"sku":"ICP-26410E","price":357.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1b9fdc7730be075504927b0427a01d92.jpg?v=1788462334","url":"https:\/\/voomisupply.com\/products\/value-collection-icp-26410e-snmg432-turning-insert-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}