{"product_id":"value-collection-c87740-jobber-drill-7-64-in-hss-6pk","title":"Value Collection C87740 Jobber Drill 7\/64 in Hss 6pk","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION C87740 is a 7\/64 inch high speed steel jobber drill bit designed for general-purpose metal drilling in trade and industrial shop environments. Built from M7-grade HSS, it features a 135-degree split point that reduces walking and requires no center punch on most surfaces. The black and gold oxide coating provides a degree of lubricity and corrosion resistance during use. At 2-5\/8 inches overall length with a 1-1\/2 inch flute length, this bit fits standard three-jaw chucks on drill presses, corded drills, and right-angle drill motors. Sold in a pack of 6, it suits maintenance crews, fabricators, and general trade technicians who cycle through small-diameter bits regularly.\u003c\/p\u003e\u003cp\u003eThis jobber drill is intended for right-hand cutting in ferrous and non-ferrous metals, plastics, and composite materials common to HVAC, electrical, and plumbing rough-in work. The straight cylindrical shank accepts any standard chuck without an adapter. The regular spiral flute clears chips efficiently in through-hole applications. Web-thinned geometry with a tapered web configuration reduces thrust load in handheld drilling situations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM7 high speed steel construction rated for heavy-duty drilling applications\u003c\/li\u003e\n\u003cli\u003e135-degree split point reduces bit walking and lowers required feed pressure\u003c\/li\u003e\n\u003cli\u003eWeb-thinned, tapered web configuration decreases thrust and heat buildup\u003c\/li\u003e\n\u003cli\u003eBlack and gold oxide finish adds lubricity and mild corrosion resistance\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting with regular spiral flute for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003ePack of 6 bits for cost-effective stocking of a commonly consumed size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose replacement jobber drill bit for use in any standard three-jaw chuck accepting a 7\/64 inch straight shank, compatible with bench drill presses, portable corded and cordless drills, and right-angle drill drivers used in trade applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert the straight shank fully into the chuck and tighten with a chuck key before operation. Secure the workpiece with a clamp or vise before drilling to prevent rotation. Apply cutting fluid when drilling hardened steel or stainless to extend bit life. Inspect bits regularly for tip wear and replace when the split point shows signs of chipping or the flutes show heat discoloration.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 7\/64 inches (0.1094 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M7 High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Black and Gold Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 7\/64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C87740\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51689294463282,"sku":"C87740","price":37.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/41c281c13b6d4e8aa14797db6e437c46.jpg?v=1788257006","url":"https:\/\/voomisupply.com\/products\/value-collection-c87740-jobber-drill-7-64-in-hss-6pk","provider":"Voomi Supply","version":"1.0","type":"link"}