{"product_id":"value-collection-bs27n0005-jobber-drill-bit-no-5-hss","title":"Value Collection BS27N0005 Jobber Drill Bit No. 5 Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION BS27N0005 is a No. 5 wire-size jobber-length drill bit machined from high speed steel (HSS) with a bright, uncoated finish. It measures 0.2055 inches in decimal diameter and features a 130-degree split point for accurate starting and reduced walking on entry. Overall length is 3.75 inches with a 2.5-inch flute length. The slow-spiral flute geometry promotes efficient chip evacuation and is particularly suited for aluminum and other non-ferrous materials. The web is thinned with a tapered web configuration to lower thrust requirements. Licensed tradespeople and machining technicians install this bit in standard drill chucks and CNC spindles alike.\u003c\/p\u003e\u003cp\u003eThis jobber drill is intended for general-purpose drilling in aluminum, brass, copper, plastic, and similar non-ferrous workpiece materials. Its straight cylindrical shank accepts standard 3-jaw drill chucks on hand drills, drill presses, and milling machines. The right-hand cutting direction is compatible with conventional clockwise-rotation drilling equipment. It conforms to ANSI specification standards and is suited for light production and maintenance drilling tasks in fabrication, HVAC, plumbing, and electrical trades where non-ferrous materials are routinely drilled.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo. 5 wire size — 0.2055 inch decimal diameter for precise sizing in close-tolerance applications\u003c\/li\u003e\n\u003cli\u003e130-degree point angle for fast penetration and reduced walking on entry\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction for durability across repeated use\u003c\/li\u003e\n\u003cli\u003eSlow-spiral flute geometry optimized for chip clearance in aluminum and non-ferrous materials\u003c\/li\u003e\n\u003cli\u003eWeb-thinned, tapered web reduces drilling thrust and extends bit life\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank fits standard drill chucks without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber-length drill bit compatible with any standard drill chuck accepting a 0.2055-inch straight shank, including hand drills, drill presses, and milling machine spindles.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit is installed and removed by a licensed machinist, maintenance technician, or qualified tradesperson using a standard keyed or keyless drill chuck. Ensure the drilling machine is fully powered down and the chuck is fully tightened before operation. Use appropriate cutting fluid or coolant when drilling non-ferrous metals at higher feed rates to extend bit life, unless the machine setup does not accommodate it. Inspect the cutting edges for wear before each use and replace the bit if chipping or dulling is observed.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: No. 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.2055 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Material\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2055 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\/Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Slow Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum and Non-Ferrous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Designation\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: BS27N0005\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51694198358322,"sku":"BS27N0005","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b1b204da9d7a283863381cfadb86da21.jpg?v=1788321574","url":"https:\/\/voomisupply.com\/products\/value-collection-bs27n0005-jobber-drill-bit-no-5-hss","provider":"Voomi Supply","version":"1.0","type":"link"}