{"product_id":"value-collection-bs26n0052-no-52-jobber-drill-bit-hss","title":"Value Collection BS26N0052 No. 52 Jobber Drill Bit Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION BS26N0052 is a No. 52 wire gauge jobber-length drill bit designed for general-purpose drilling in a wide range of materials. Manufactured from high speed steel (HSS) with a bright uncoated finish, it features a 140-degree split point and a fast spiral flute configuration for efficient chip evacuation. The web-thinned, tapered web design reduces thrust and improves hole entry. At 1.875 inches overall length with a 0.875-inch flute length and a 0.0635-inch straight shank diameter, this bit is sized for precision drilling in tight applications. It is installed and used by machinists, maintenance technicians, metalworkers, and general tradespeople.\u003c\/p\u003e\u003cp\u003eThis jobber drill bit is suited for drilling in steel, aluminum, non-ferrous metals, and wood. Its compact overall length and wire gauge sizing make it a practical choice for circuit board work, light fabrication, and production drilling where small-diameter holes are required. The right-hand cutting direction and fast spiral flute geometry support clean hole formation in both handheld and drill press setups. This bit conforms to ANSI specification standards.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo. 52 wire gauge size — 0.0635-inch diameter for precision small-hole drilling\u003c\/li\u003e\n\u003cli\u003e140-degree point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n\u003cli\u003eFast spiral flute design promotes efficient chip removal during cutting\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction provides durability across steel, aluminum, non-ferrous metals, and wood\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish suitable for general-purpose use without added coating cost\u003c\/li\u003e\n\u003cli\u003eRight-hand cut with straight cylindrical shank for compatibility with standard chucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber drill bit for use in standard drill presses, CNC drilling operations, and handheld power drills equipped with chucks capable of accepting a 0.0635-inch straight shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use of this bit is performed by machinists, maintenance technicians, or qualified tradespeople. Secure the straight shank firmly in the drill chuck before operation and verify the workpiece is clamped or fixtured to prevent movement. Select appropriate feed rate and spindle speed for the workpiece material to avoid overheating the bit. Do not force the bit through material — allow the flute geometry to clear chips naturally.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire Gauge)\u003c\/strong\u003e: No. 52\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.0635 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Fast Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0635 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Aluminum and Non-Ferrous Metals, Wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Grade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: BS26N0052\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51691403739442,"sku":"BS26N0052","price":37.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e81ff163739ec27323b1748473f27b4b.jpg?v=1788284586","url":"https:\/\/voomisupply.com\/products\/value-collection-bs26n0052-no-52-jobber-drill-bit-hss","provider":"Voomi Supply","version":"1.0","type":"link"}