{"product_id":"value-collection-950-14011-lathe-tool-post-holder-series-ca","title":"Value Collection 950-14011 Lathe Tool Post Holder Series Ca","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 950-14011 is a Series CA, Number 1 turning and facing tool post holder designed for engine lathes with a swing range of 14 to 20 inches. It accepts cutting tools from 1\/2 inch up to 1 inch in tool bit range and delivers a centerline height of 1-11\/16 inches. At 2-1\/2 inches overall height and 5.31 inches overall length, the holder provides a rigid, low-profile platform for facing and turning operations. It is intended for machinists and tool room technicians working on mid-size engine lathes in job shop, maintenance, or production environments.\u003c\/p\u003e\n\u003cp\u003eThis holder fits lathes in the 14-to-20-inch swing class, which covers a broad range of common bench and floor-model engine lathes found in industrial shops and vocational settings. It is suited for general turning and facing passes where stable tool positioning and repeatable centerline height are required. No through-coolant provision is included, making it appropriate for dry or flood-coolant setups where coolant is applied externally.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSeries CA, Number 1 holder for lathes with 14 to 20 inch swing (400 to 500 mm)\u003c\/li\u003e\n  \u003cli\u003eAccepts cutting tools from 1\/2 inch to 1 inch tool bit range with a 1 inch maximum cutting tool size\u003c\/li\u003e\n  \u003cli\u003eCenterline height of 1-11\/16 inches for consistent tool alignment\u003c\/li\u003e\n  \u003cli\u003eOverall height of 2-1\/2 inches and overall length of 5.31 inches for a compact, rigid profile\u003c\/li\u003e\n  \u003cli\u003eTurning and facing configuration supports a wide range of common lathe operations\u003c\/li\u003e\n  \u003cli\u003eNo through-coolant port — compatible with external flood or dry cutting setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with Series CA quick-change tool post systems on engine lathes with a swing of 14 to 20 inches (400 to 500 mm).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist with the lathe powered off and the spindle fully stopped before mounting or adjusting any tool post holder. Confirm centerline height alignment with the lathe spindle axis before tightening the holder in place. Use appropriate set screws and wrenches as specified by the tool post system manufacturer. Follow all shop safety procedures when handling cutting tools during installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHolder Number\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Turning and Facing Holder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLathe Swing\u003c\/strong\u003e: 14 to 20 inches (400 to 500 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.31 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Height\u003c\/strong\u003e: 1-11\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Tool Size\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Bit Range\u003c\/strong\u003e: 1\/2 to 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.7 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112800\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 950-14011\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51700033782066,"sku":"950-14011","price":74.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8e787a4fe6de8fd0a1eebd758969eb85.jpg?v=1788385197","url":"https:\/\/voomisupply.com\/products\/value-collection-950-14011-lathe-tool-post-holder-series-ca","provider":"Voomi Supply","version":"1.0","type":"link"}