{"product_id":"value-collection-934-000-201-square-end-mill-hss-2-flute","title":"Value Collection 934-000-201 Square End Mill Hss 2 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 934-000-201 is a single-end square end mill ground from high speed steel for general-purpose milling of ferrous and non-ferrous materials. The tool measures 0.0625 inches in cutting diameter with a 0.09375-inch length of cut and a 1.5-inch overall length on a 0.1875-inch straight shank. A 40-degree helix angle promotes smooth chip evacuation at small diameters, and the bright uncoated finish suits applications where coating cost is not justified. With a stub-length configuration and center-cutting geometry, this mill can both plunge and feed laterally in a single setup. It is typically installed in CNC machining centers, knee mills, and manual milling machines by machinists and tool-and-die technicians.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for light material removal in tight-tolerance applications where a small-diameter tool is required. The 2-flute spiral design keeps chip load manageable at reduced feed rates typical of 1\/16-inch tooling. Its stub length provides additional rigidity relative to longer reach versions of the same diameter. Right-hand cut and right-hand flute orientation are standard for conventional milling spindle rotation. The Series 856 designation identifies this as part of a defined product family within the VALUE COLLECTION line.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCenter-cutting geometry allows direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003e40-degree helix angle promotes chip flow and reduces cutting forces at small diameters\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction provides toughness for interrupted cuts and manual-feed applications\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish is compatible with cutting oils and water-soluble coolants\u003c\/li\u003e\n  \u003cli\u003eStraight shank fits standard collets and end mill holders sized for 0.1875-inch shanks\u003c\/li\u003e\n  \u003cli\u003eStub length design maximizes rigidity for this diameter class\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use single-end square end mill for milling machines and machining centers accepting a 0.1875-inch straight shank; no specific model compatibility data was provided for this SKU.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists using a collet or end mill holder matched to the 0.1875-inch shank diameter. The spindle must be fully stopped and the machine locked out before changing tooling. Verify runout at the collet before cutting, as small-diameter end mills are sensitive to even slight misalignment. At 0.0625-inch diameter, feed rates and depth of cut should be conservative to avoid tool breakage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.09375 inches (3\/32 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1875 inches (3\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0010 to 0.000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 856\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 934-000-201\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51699185287474,"sku":"934-000-201","price":28.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ad788600d6d2d5eab5e9c55555daeb3f.jpg?v=1788373247","url":"https:\/\/voomisupply.com\/products\/value-collection-934-000-201-square-end-mill-hss-2-flute","provider":"Voomi Supply","version":"1.0","type":"link"}