{"product_id":"value-collection-934-000-194-square-end-mill-0-025-in-hss","title":"Value Collection 934-000-194 Square End Mill 0.025 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 934-000-194 is a single-end square end mill designed for precision milling operations in metal, plastics, and composite materials. Built from high speed steel (HSS), this stub-length tool features a 0.025-inch cutting diameter and a 0.037-inch length of cut, making it well-suited for fine detail work, slotting, and profiling in tight spaces. The 2-flute geometry and 40-degree right-hand helix promote efficient chip evacuation while maintaining accurate edge geometry at small diameters. A licensed machinist or CNC operator typically installs and runs this end mill on a manual mill or CNC machining center.\u003c\/p\u003e\n\u003cp\u003eThis end mill fits applications where a small-diameter, stub-length tool is required, including micro-milling, engraving prep, and precision slot cutting in soft to medium-hardness workpieces. The 0.125-inch straight shank is a standard size compatible with collet chucks and small end mill holders used in both manual and CNC setups. The bright uncoated finish is appropriate for general-purpose cutting where coating is not required. This is a Series 856 tool from the VALUE COLLECTION line.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.025-inch cutting diameter for fine detail and micro-milling applications\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction provides toughness across a range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003e2-flute, right-hand spiral geometry promotes chip clearing in shallow slots and pockets\u003c\/li\u003e\n  \u003cli\u003e40-degree helix angle supports smooth cutting action and reduced chatter\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows plunge entry into the workpiece\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish suitable for general-purpose use without added coating cost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use small-diameter end mill for machining setups that accept a 0.125-inch straight shank via standard collet chuck or end mill holder.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC operator. Secure the 0.125-inch shank in a compatible collet or end mill holder, torquing to the chuck or holder specification per manufacturer guidelines. At very small diameters, runout and tool projection length are critical factors — minimize stick-out to reduce deflection and risk of tool breakage. Always verify spindle speed and feed rate settings are appropriate for the workpiece material and tool diameter before beginning a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.037 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0010 to 0.000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 856\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 934-000-194\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51701561426226,"sku":"934-000-194","price":31.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/aa377301c3b0284caf1618460966de88.jpg?v=1788401534","url":"https:\/\/voomisupply.com\/products\/value-collection-934-000-194-square-end-mill-0-025-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}