{"product_id":"value-collection-934-000-102-square-end-mill-5-32-in","title":"Value Collection 934-000-102 Square End Mill 5\/32 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 934-000-102 is a cobalt square end mill designed for milling ferrous and tough alloy materials in machining centers, manual mills, and CNC setups. Built from M42 high-speed cobalt steel, this double-end tool delivers extended tool life compared to standard HSS end mills. It features a 5\/32 inch (0.1563 inch) cutting diameter, a 7\/8 inch length of cut, and a 40-degree helix angle that promotes smooth chip evacuation and reduced chatter. The uncoated bright finish suits applications where coating is not required or where regrinding is anticipated. Machinists and tool-and-die technicians are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for slot milling, side milling, and light plunge cuts in steel, stainless steel, cast iron, and high-temp alloys. The centercutting geometry allows direct plunge entry without a pilot hole. The long-length designation provides additional reach for deep-pocket or extended-reach applications. With a 3\/16 inch straight shank and a 3-1\/4 inch overall length, this tool fits standard ER collet chucks, end mill holders, and similar toolholding systems used in production and job-shop environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction for improved hardness and heat resistance over standard HSS\u003c\/li\u003e\n  \u003cli\u003eDouble-end design extends usable tool life  -  both ends are active cutting ends\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry into the workpiece\u003c\/li\u003e\n  \u003cli\u003e40-degree helix angle promotes efficient chip flow and smooth cutting action\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with right-hand flute spiral  -  standard orientation for most milling setups\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish  -  suitable for regrinding and use with cutting fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or production-grade end mill for use in standard 3\/16 inch straight-shank toolholders including ER collet chucks and end mill holders across manual and CNC milling machines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or tooling technician. Ensure the machine spindle is fully stopped and the machine is locked out before changing tooling. Seat the 3\/16 inch straight shank fully into the toolholder and torque the retention mechanism per the toolholder manufacturer specification. Verify runout with a dial indicator before beginning a cut, particularly given the close diameter tolerance of -0.0025 to +0.0000 inch on this tool.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/32 inch (0.1563 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 7\/8 inch (0.8750 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-1\/4 inches (3.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0025 to +0.0000 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 551\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 934-000-102\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":67948528402738,"sku":"934-000-102","price":47.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b8530792c348185a5a84844794438314.jpg?v=1791666151","url":"https:\/\/voomisupply.com\/products\/value-collection-934-000-102-square-end-mill-5-32-in","provider":"Voomi Supply","version":"1.0","type":"link"}