{"product_id":"value-collection-86853256-split-lock-washer-1-2-in-grade-8","title":"Value Collection 86853256 Split Lock Washer 1\/2 in Grade 8","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 86853256 is a Grade 8 alloy steel split lock washer sized for 1\/2 inch fasteners and finished with a zinc plating for corrosion resistance. The split lock design bites into the bearing surface under load, resisting loosening caused by vibration and torque relaxation. Inside diameter runs 0.502 to 0.512 inches with an outside diameter of 0.779 to 0.869 inches and a nominal thickness of 0.125 inches. Grade 8 material provides higher hardness and load capacity than standard Grade 5 or low-carbon washers. Plumbers, electricians, HVAC technicians, and millwrights routinely use this washer wherever a bolted joint must hold under dynamic or vibrating loads. Sold in a pack of 25.\u003c\/p\u003e\n\u003cp\u003eThis split lock washer is suited for general mechanical and structural fastening in residential and commercial maintenance, equipment assembly, and trade rough-in work. Typical applications include securing flanges, equipment mounting brackets, pipe hangers, electrical enclosures, and HVAC equipment bases where standard flat washers alone would not prevent joint loosening. The 1\/2 inch screw size fits the most common heavy fastener diameter found across HVAC, plumbing, and electrical rough-in hardware. The zinc plating makes it acceptable for indoor and mildly corrosive environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eGrade 8 alloy steel construction provides high hardness and tensile strength for heavy-duty fastening\u003c\/li\u003e\n  \u003cli\u003eSplit lock geometry bites into mating surfaces to resist vibration-induced loosening\u003c\/li\u003e\n  \u003cli\u003eZinc plated finish adds corrosion resistance for indoor and light-duty outdoor use\u003c\/li\u003e\n  \u003cli\u003eInside diameter 0.502 to 0.512 inches fits standard 1\/2 inch fasteners\u003c\/li\u003e\n  \u003cli\u003eNominal thickness 0.125 inches with a maximum thickness of 0.172 inches at the split\u003c\/li\u003e\n  \u003cli\u003ePack of 25 units supports batch installations and maintenance stocking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard inch-series split lock washer for use with 1\/2 inch screws, bolts, and hex cap fasteners in general mechanical, HVAC, plumbing, and electrical installations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall with the split ends contacting the bearing surface of the fastener head or nut, not the work surface, to allow the edges to engage properly under torque. Always de-energize or shut off power and pressure to the equipment being serviced before disassembling or reassembling bolted joints. Use the appropriate drive tools and follow applicable torque guidelines for the fastener grade and size. Do not reuse split lock washers that have been fully flattened, as they will not provide effective locking action.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScrew Size\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Alloy Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish Coating\u003c\/strong\u003e: Zinc Plated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Inside Diameter\u003c\/strong\u003e: 0.502 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Inside Diameter\u003c\/strong\u003e: 0.512 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Outside Diameter\u003c\/strong\u003e: 0.779 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Outside Diameter\u003c\/strong\u003e: 0.869 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Thickness\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Thickness\u003c\/strong\u003e: 0.172 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMilitary Specification\u003c\/strong\u003e: Does Not Meet Military Specifications\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 25\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 86853256\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51719096598834,"sku":"86853256","price":20.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/74d8a1b7c679438174805e6edb1532c5.jpg?v=1788557416","url":"https:\/\/voomisupply.com\/products\/value-collection-86853256-split-lock-washer-1-2-in-grade-8","provider":"Voomi Supply","version":"1.0","type":"link"}