{"product_id":"value-collection-80122328-internal-snap-retaining-ring","title":"Value Collection 80122328 Internal Snap Retaining Ring","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 80122328 is an internal snap retaining ring designed to secure components within a bored housing or assembly. Manufactured from spring steel with a phosphate finish, this ring seats into a machined groove to prevent axial movement of shafts, pins, and other retained parts. It is sized for a 1-1\/2 inch nominal bore diameter with a free outer diameter of 1.66 inches. Ring thickness is 0.05 inches. Groove width is 0.056 inches and groove depth is 0.047 inches. Machinists, millwrights, maintenance technicians, and assembly professionals install these rings across a wide range of mechanical and industrial applications.\u003c\/p\u003e\n\u003cp\u003eThis retaining ring is suited for use in rotating assemblies, gearboxes, pump housings, motor end bells, and general mechanical sub-assemblies where a standard internal snap ring is required. The phosphate finish provides a baseline level of corrosion resistance and helps retain lubrication at the ring surface. It is appropriate for both light industrial and trade maintenance contexts, including HVAC equipment assemblies, pump rebuilds, and similar service work requiring internal bore retention hardware.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSpring steel construction for consistent snap-fit retention and reliable spring-back during installation\u003c\/li\u003e\n  \u003cli\u003ePhosphate finish provides mild corrosion resistance and lubrication retention\u003c\/li\u003e\n  \u003cli\u003e1-1\/2 inch nominal bore size with a free outer diameter of 1.66 inches\u003c\/li\u003e\n  \u003cli\u003eGroove width of 0.056 inches with a tolerance of 0.000 to 0.004 inches\u003c\/li\u003e\n  \u003cli\u003eGroove diameter tolerance of -0.004 to 0.005 inches for precise seating\u003c\/li\u003e\n  \u003cli\u003eSold in a package quantity of 10 rings, minimum order quantity of 1 package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or service-stock internal snap retaining ring for any housing or bore machined to accept a 1-1\/2 inch internal snap ring groove per standard dimensional specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInternal snap retaining rings of this type are installed and removed by machinists or maintenance technicians using internal snap ring pliers sized for the bore diameter. Always power down and de-energize any equipment before disassembling housings or bearing bores. Confirm groove dimensions against ring specifications before installation to avoid under-seating or ring distortion. Do not reuse a ring that has been over-expanded or shows visible deformation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRing Type\u003c\/strong\u003e: Internal Snap\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Bore Diameter\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFree Outer Diameter\u003c\/strong\u003e: 1.66 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRing Thickness\u003c\/strong\u003e: 0.05 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRing Thickness Tolerance\u003c\/strong\u003e: -0.002 to 0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGroove Width\u003c\/strong\u003e: 0.056 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGroove Width Tolerance\u003c\/strong\u003e: 0.000 to 0.004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGroove Depth\u003c\/strong\u003e: 0.047 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGroove Diameter Tolerance\u003c\/strong\u003e: -0.004 to 0.005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Spring Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Phosphate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 80122328\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51722379952434,"sku":"80122328","price":17.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9bf87d4acfde97823c9907e9e37fb09b.jpg?v=1788590252","url":"https:\/\/voomisupply.com\/products\/value-collection-80122328-internal-snap-retaining-ring","provider":"Voomi Supply","version":"1.0","type":"link"}