{"product_id":"value-collection-724-6436-3-8-in-cobalt-roughing-end-mill","title":"Value Collection 724-6436 3\/8 in Cobalt Roughing End Mill","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 724-6436 is a single-end roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel with a TiN (titanium nitride) coating, it handles harder workpiece materials and elevated cutting temperatures better than standard HSS tooling. The 3\/8 inch diameter, 3-flute geometry produces a coarse chip-breaking action that clears chips efficiently and reduces heat buildup at the cutting edge. With a 1.125 inch length of cut and a 2.8125 inch overall length, this end mill is suited for side milling, slotting, and roughing passes where stock removal rate matters more than surface finish. It is installed in CNC machining centers, knee mills, and manual vertical mills.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for roughing passes on ferrous and non-ferrous metals including steel alloys, stainless steel, and cast iron where a high material removal rate is the primary objective. The right-hand cutting direction and right-hand flute spiral, combined with a high helix style, promote efficient chip evacuation and reduce chatter during aggressive cuts. Center-cutting capability allows plunge entry directly into the workpiece without a pre-drilled pilot hole. The 3\/8 inch shank diameter fits standard ER collets, end mill holders, and Weldon-style set-screw holders commonly found in production and job-shop environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt steel construction for improved heat and wear resistance over standard HSS\u003c\/li\u003e\n\u003cli\u003eTiN coating extends tool life and reduces friction at the cutting edge\u003c\/li\u003e\n\u003cli\u003e3-flute, high-helix geometry promotes fast chip evacuation during roughing cuts\u003c\/li\u003e\n\u003cli\u003eCenter-cutting design allows direct plunge milling without a pilot hole\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand spiral for conventional and climb milling compatibility\u003c\/li\u003e\n\u003cli\u003e3\/8 inch shank fits standard collet chucks and end mill holders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or standard tooling selection for 3\/8 inch end mill holders, ER collet systems, and Weldon-style set-screw holders used in vertical milling machines and CNC machining centers.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Ensure the spindle is fully stopped and locked out before changing tooling. Seat the shank fully into the collet or holder to the manufacturer-recommended engagement depth before tightening. Inspect the tool for chipping or wear before each use and replace if the cutting edges show visible damage to avoid workpiece scrap or holder damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inch (0.375 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/8 inches (1.1250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: High\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 724-6436\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51699517882674,"sku":"724-6436","price":105.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e0ddffc5b2621b6adeddba87cac5dae4.jpg?v=1788376853","url":"https:\/\/voomisupply.com\/products\/value-collection-724-6436-3-8-in-cobalt-roughing-end-mill","provider":"Voomi Supply","version":"1.0","type":"link"}