{"product_id":"value-collection-724-4197-roughing-finishing-end-mill","title":"Value Collection 724-4197 Roughing Finishing End Mill","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 724-4197 is a roughing finishing end mill designed for high-material-removal milling operations in ferrous and hardened alloy applications. Built from M42 cobalt high-speed steel with a bright\/uncoated finish, this single-end tool delivers aggressive stock removal while maintaining edge integrity under elevated heat and load. The 4-flute, right-hand cutting configuration paired with a 30-degree helix angle promotes efficient chip evacuation and smooth cutting action across a range of milling passes. Machinists and CNC operators in production and job-shop environments are the primary users of this tool type.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for face milling, slotting, and profiling passes in steel, stainless, and cobalt-bearing alloys where tool life and heat resistance are priorities. The 3\/4 inch diameter and 4.125 inch length of cut make it a practical choice for medium-depth peripheral milling. The Weldon flat shank provides a positive tool-holder engagement, reducing pullout risk under interrupted cuts or aggressive feed rates. It is not center-cutting and should not be used for direct plunge operations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt HSS construction for elevated heat and wear resistance in ferrous materials\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes smooth chip flow and reduces cutting forces\u003c\/li\u003e\n\u003cli\u003e4-flute, right-hand geometry balances stock removal with surface finish\u003c\/li\u003e\n\u003cli\u003eWeldon flat shank provides positive seating in standard end mill holders\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish suited for use with cutting fluid in ferrous applications\u003c\/li\u003e\n\u003cli\u003eNot center-cutting — designed for peripheral milling and slotting, not plunge entry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use roughing finishing end mill for standard 3\/4 inch end mill holders with Weldon flat engagement, consistent with common tooling setups in vertical machining centers and manual knee mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a machinist or CNC operator using a standard Weldon-flat end mill holder torqued according to the holder manufacturer's specification. Ensure the machine spindle is fully powered down and locked out before changing tooling. Confirm tool runout with a dial indicator after seating, as excessive runout accelerates edge wear and reduces surface finish quality. Do not use this tool for plunge entry cuts; pre-drill or ramp-entry techniques are required for pocket operations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/4 inches (0.7500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 4.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 6.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 724-4197\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51699731562802,"sku":"724-4197","price":197.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/80e577d0fccdde24436c626f85240630.jpg?v=1788380001","url":"https:\/\/voomisupply.com\/products\/value-collection-724-4197-roughing-finishing-end-mill","provider":"Voomi Supply","version":"1.0","type":"link"}