{"product_id":"value-collection-724-4020-roughing-finishing-end-mill","title":"Value Collection 724-4020 Roughing Finishing End Mill","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 724-4020 is a cobalt roughing finishing end mill designed for aggressive material removal followed by finish passes in a single tool. Machined from M42 cobalt high-speed steel, it handles tough ferrous metals and heat-resistant alloys where standard HSS end mills fall short. The 1\/4 inch diameter, 3-flute, square-end geometry with a 30-degree right-hand helix balances chip evacuation with cutting efficiency. The Weldon flat shank provides positive engagement in the tool holder, reducing pullout under heavy cuts. This end mill is used by machinists and toolroom professionals in manual mills and CNC machining centers.\u003c\/p\u003e\n\u003cp\u003eThe 724-4020 suits production and job shop environments requiring combined roughing and finishing capability in a compact 1\/4 inch diameter tool. With a 5\/8 inch length of cut and 2-7\/16 inch overall length, it fits standard tooling setups for shallow-to-medium depth cuts. The single-end, right-hand cutting direction is compatible with conventional right-hand spindle machines. It is sold individually and is appropriate for milling steel, stainless, and similar materials where cobalt tooling is preferred over carbide for toughness and regrindability.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction for toughness and heat resistance in ferrous and hard alloys\u003c\/li\u003e\n  \u003cli\u003e3-flute square end geometry for combined roughing and finishing in one pass\u003c\/li\u003e\n  \u003cli\u003e30-degree right-hand helix for balanced chip flow and cutting force\u003c\/li\u003e\n  \u003cli\u003eWeldon flat shank reduces tool pullout under load\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish suitable for regrinding and re-use\u003c\/li\u003e\n  \u003cli\u003eNon-centercutting design intended for side milling and slot entry from the periphery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement for standard 1\/4 inch diameter, 3\/8 inch Weldon flat shank end mill holders used in manual vertical mills and right-hand-spindle CNC machining centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists following standard tool change procedures. Power down and lock out the spindle before inserting or removing the end mill. Secure the Weldon flat against the set screw in the holder to the appropriate holder specification to prevent axial movement. This tool is non-centercutting and should not be plunged directly into solid material without a pre-drilled entry point or ramping path.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-7\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Square\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0045 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 724-4020\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51721317908786,"sku":"724-4020","price":30.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5da43e949202b2d00b216a1ecc776b19.jpg?v=1788576366","url":"https:\/\/voomisupply.com\/products\/value-collection-724-4020-roughing-finishing-end-mill","provider":"Voomi Supply","version":"1.0","type":"link"}